Yamaha DSP-AX563 owner manual Specifications, 79 En

Page 81

Specifications

AUDIO SECTION

Minimum RMS Output Power for Front, Center, Surround, Surround Back

1 kHz, 0.9% THD, 6

90 W

• Dynamic Power

 

IHF, 6/4/2

100/110/125 W

• Maximum Input Signal

 

CD, etc. Effect On, 1 kHz, 0.5% THD

2.0 V or more

• Frequency Response

 

CD, etc. to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

1 kHz, 50 W, Front L/R, 6

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

CD (200 mV) to Front L/R, Effect Off

98 dB or more

CD (250 mV) to Front L/R, Effect Off

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

CD, etc. (5.1 kshorted) to Front L/R

 

...................................................................

60 dB/45 dB or more

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/100 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Headphone Jack Rated Output/Impedance

400 mV/470

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 k

CD, etc.

MULTI CH INPUT

200 mV/47 k

• Output Level/Output Impedance

200 mV/1.2 k

AUDIO OUT (REC)

SUBWOOFER OUTPUT

4 V/1.2 k

Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP, SUR. B L/R SP:

SMALL/SML)

12 dB/oct.

L.P.F. (Subwoofer)

24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)

PAL

• Video Signal Type (Video Conversion)

NTSC/PAL

• Signal Level

1 Vp-p/75

Composite

 

S-video

1 Vp-p/75 (Y), 0.286 Vp-p/75 (C)

Component

1 Vp-p/75 (Y), 0.7 Vp-p/75 (PB/PR)

• Signal to Noise Ratio

50 dB or more

• Maximum Input Level

1.5 Vp-p or more

• Frequency Response (MONITOR OUT)

 

Component Signal

5 Hz to 60 MHz, –3 dB

GENERAL

• Power Supply

230 V AC, 50 Hz

• Power Consumption

240 W

• Standby Power Consumption

0.8 W or less

• AC Outlets

1 (100 W maximum)

• Dimensions (W x H x D)

435 x 151 x 352 mm

 

(17-1/8” x 5-15/16” x 13-7/8”)

• Weight

9.0 kg (19 lbs 13 oz)

* Specifications are subject to change without notice.

INFORMATION

ADDITIONAL

 

 

English

79 En

Image 81
Contents DSP-AX563 Special Instructions for U.K. Model For U.K. customersContents Features Getting started Quick start guide Set up your speakersPreparation Check the items Press Scene 1 button Enjoy DVD playbackSurround and surround back speakers Front and center speakersConnect the subwoofer cable to the input Jack of the subwoofer and the SubwooferFor further connections Using the other Scene buttons Press Scene 1 buttonAbout Scene function What do you want to do with this unit? Connections Rear panelName 10 En Placing speakersConnecting speakers 11 EnFront B terminals Connecting to the Front a terminals Before connecting to the Speakers TerminalUsing bi-amplification connections 12 En13 En Information on jacks and cable plugsAudio jacks Video jacksInformation on Hdmi Audio signal Compatible14 En Hdmi compatibility with this unitAudio signal flow Audio and video signal flowVideo signal flow 15 En16 En Connecting video componentsConnecting a DVD player Connecting other components17 En DVD playerConnecting a set-top box Connecting a DVD recorder, PVR or VCR18 En DVD recorder PVR or VCRConnecting a multi-format player or an external decoder Connecting audio components19 En Connect the audio components as followsUsing Remote OUT jack 20 EnYamaha Component CD or DVD player, etc Connecting the power cable Using the Video AUX jacks on the front panelTurning on and off the power 21 En22 En Front panel display23 En Using the remote controlOptimizing the speaker setting for your listening room Using Auto Setup24 En 25 En Number of speakers SP 26 EnSpeaker distance Dist Speaker level LVLIf an error screen appears 27 EnIf Warning appears Selecting the desired Scene template Selecting the Scene templates28 En Selected Scene template is assigned to the buttonWhich Scene template would you like to select? 29 En30 En Preset Scene templates descriptionsCreating your original Scene templates Customizing the preset Scene Templates31 En Renaming the Scene templatesUsing remote control on the Scene feature Controlling the input source Components in the Scene mode32 En Playback Quick guide to contentsBasic operations 33 EnSelecting audio input jacks Selecting the Multi CH Input component34 En Muting the audio output Using your headphones35 En Current status screen appears in the OSD36 En Displaying the input source informationAudio information Video information37 En Using the sleep timerSound field programs Sound field program descriptions38 En Enjoying 2-channel sources using Standard decoders Enjoying unprocessed input sources Straight decoding mode39 En Editing sound fields parameters 40 EnAdjusting the tonal quality Using audio featuresAdjusting the speaker level Enjoying high quality sound42 En Selecting the night listening modePlayback operation Using a USB memory device or a USB portable audio player43 En Supported USB devicesFunction of the play information display Playback icon All all repeat, 1 single repeat iconsShuffle icon Remote control operation Using iPodControlling iPod in the simple remote Mode Controlling iPod46 En Controlling iPod in the menu browse ModePress 3V-AUX/DOCKand then Shuffle ShufflePairing by using SET Menu Using Bluetooth componentsQuick pairing 47 En48 En RecordingAuto setup Auto Setup Manual setup Manual Setup49 En Using SET Menu Signal information50 En 51 En Speaker settings Aspeaker SET52 En 53 En Subwoofer phase Subwoofer PhaseSpeaker level BSP Level Crossover Cross OverSpeaker distance CSP Distance 54 EnCenter speaker equalizer Dcenter GEQ Low-frequency effect level Elfe Level55 En Audio settings Gaudio SET56 En Extended decoder select modeExtended surround Iextd SUR Support audio Support AudioInput and output assignment 57 EnDecoder select mode DTS decoder prioritize setting58 En Multi channel input setup Display settings Adisplay SET59 En 60 En Source feature OSD display timeFront panel display scroll FL Scroll OSD shift OSD Shift7ENTER to start pairing Bluetooth setting Ebluetooth SETPress 8RETURN to exit from Start Pairing 61 EnUSB playback styles Fusb Play Style 62 EnControlling this unit, a TV, or other components Remote control features63 En Controlling this unitControlling other components 64 EnRemote control code default settings Setting remote control codesInput Component Manufacturer Default 65 EnBi-amplifier setting BI-AMP Advanced setupScene IR code setting Scene IR 66 EnProblem Cause Remedy See Troubleshooting67 En General68 En 69 En Before Auto Setup During Auto Setup70 En 1OUT of Phase After Auto Setup3LEVEL Error 71 En72 En Access errorDisconnected Unable to playIPod 73 En74 En BluetoothResetting the system Remote controlAdvanced setup menu appears in the front panel display 75 En 76 En Glossary77 En Video signal 78 EnVirtual Cinema DSP 79 En SpecificationsIndex 80 EnNumerics Headphone 81 En82 En Subwoofer PhaseConditions 83 EnAB C D Front panelRemote control Iii List of remote control codesTape Deck LD playerITT VCR KLH DSP-AX563 TV AV