SET MENU
Front panel display scroll FL SCROLL
Use this feature to set whether to display the information (such as a song title or a channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when “DOCK” is selected as the input source.
Choices: CONT, ONCE
•Select “CONT” to display the operation status in the front panel display in a continuous manner.
•Select “ONCE” to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once.
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD. Control range:
Control step: 1
Initial setting: 0
•Press 7l to lower the position of the OSD.
•Press 7hto raise the position of the OSD.
Source feature OSD display time
OSD-SOURCE
Use this feature to set the amount of time to display the iPod menu in the OSD after you perform a certain operation.
Choices: ON, 10s, 30s
•Select “ON” to display the OSD unceasingly during an operation.
•Select “10s” to turn off the OSD 10 seconds after you perform a certain operation.
•Select “30s” to turn off the OSD 30 seconds after you perform a certain operation.
Amplifier function OSD display time
OSD-AMP
Use this feature to set the amount of time to display the status after you perform a certain operation.
Choices: ON, 10s, 30s
•Select “ON” to display the OSD constantly during an operation.
•Select “10s” to turn off the OSD 10 seconds after you perform a certain operation.
•Select “30s” to turn off the OSD 30 seconds after you perform a certain operation.
■Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON
3 OPTION MENU
B)MEMORY GUARD
>OFF ON
[p]/[[]:Select
•Select “OFF” to turn off the “MEMORY GUARD” feature.
•Select “ON” to protect:
–sound field program parameters
–all “SET MENU” items
–all speaker levels
–SCENE template parameters
Note
When “MEMORY GUARD” is set to “ON”, you cannot select and adjust any other “SET MENU” items.
■Audio select C)AUDIO SELECT
Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit.
Choices: AUTO, LAST
3 OPTION MENU
C)AUDIO SELECT >AUTO LAST
[p]/[[]:Select
•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate input mode.
•Select “LAST” if you want this unit to automatically select the last input mode used for the connected input source (see page 34).