Yamaha DSP-AX563 owner manual Recording, 48 En

Page 50

Recording

Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components.

Notes

•When this unit is set to the standby mode, you cannot record between other components connected to this unit.

•TONE CONTROL (see page 41) and VOLUME settings, speaker levels (see page 41) and the sound field programs (see page 38) do not affect recorded material.

•The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

•Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if your source component is connected to provide only digital signals, you cannot record the source.

•S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an S-video or a composite video signal on your DVD recorder.

•A given input source is not output on the same OUT (REC) channel.

•The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.

•Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is turned off, this unit may distort the sound from other components.

•Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

y

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

1Turn on all the connected components.

2Press J INPUT l / h repeatedly (or press one of the input selector buttons (3)) to select the source component you want to record from.

3Start playback on the selected source component or select a broadcast station.

4Start recording on the recording component.

48 En

Image 50

Contents DSP-AX563 For U.K. customers Special Instructions for U.K. ModelContents Features Getting started Preparation Check the items Set up your speakersQuick start guide Press Scene 1 button Enjoy DVD playbackConnect the subwoofer cable to the input Front and center speakersSurround and surround back speakers Jack of the subwoofer and the SubwooferFor further connections About Scene function Using the other Scene buttonsPress Scene 1 button What do you want to do with this unit? Name ConnectionsRear panel Placing speakers 10 EnFront B terminals Connecting speakers11 En Using bi-amplification connections Before connecting to the Speakers TerminalConnecting to the Front a terminals 12 EnAudio jacks Information on jacks and cable plugs13 En Video jacks14 En Audio signal CompatibleInformation on Hdmi Hdmi compatibility with this unitVideo signal flow Audio and video signal flowAudio signal flow 15 EnConnecting video components 16 En17 En Connecting other componentsConnecting a DVD player DVD player18 En Connecting a DVD recorder, PVR or VCRConnecting a set-top box DVD recorder PVR or VCR19 En Connecting audio componentsConnecting a multi-format player or an external decoder Connect the audio components as followsYamaha Component CD or DVD player, etc Using Remote OUT jack20 En Turning on and off the power Using the Video AUX jacks on the front panelConnecting the power cable 21 EnFront panel display 22 EnUsing the remote control 23 En24 En Optimizing the speaker setting for your listening roomUsing Auto Setup 25 En Speaker distance Dist 26 EnNumber of speakers SP Speaker level LVLIf Warning appears If an error screen appears27 En 28 En Selecting the Scene templatesSelecting the desired Scene template Selected Scene template is assigned to the button29 En Which Scene template would you like to select?Preset Scene templates descriptions 30 En31 En Customizing the preset Scene TemplatesCreating your original Scene templates Renaming the Scene templates32 En Using remote control on the Scene featureControlling the input source Components in the Scene mode Basic operations Quick guide to contentsPlayback 33 En34 En Selecting audio input jacksSelecting the Multi CH Input component 35 En Using your headphonesMuting the audio output Current status screen appears in the OSDAudio information Displaying the input source information36 En Video informationUsing the sleep timer 37 En38 En Sound field programsSound field program descriptions 39 En Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode 40 En Editing sound fields parametersAdjusting the speaker level Using audio featuresAdjusting the tonal quality Enjoying high quality soundSelecting the night listening mode 42 En43 En Using a USB memory device or a USB portable audio playerPlayback operation Supported USB devicesShuffle icon Function of the play information displayPlayback icon All all repeat, 1 single repeat icons Controlling iPod in the simple remote Mode Using iPodRemote control operation Controlling iPodPress 3V-AUX/DOCKand then Controlling iPod in the menu browse Mode46 En Shuffle ShuffleQuick pairing Using Bluetooth componentsPairing by using SET Menu 47 EnRecording 48 En49 En Auto setup Auto SetupManual setup Manual Setup 50 En Using SET MenuSignal information Speaker settings Aspeaker SET 51 En52 En Speaker level BSP Level Subwoofer phase Subwoofer Phase53 En Crossover Cross OverCenter speaker equalizer Dcenter GEQ 54 EnSpeaker distance CSP Distance Low-frequency effect level Elfe LevelAudio settings Gaudio SET 55 EnExtended surround Iextd SUR Extended decoder select mode56 En Support audio Support Audio57 En Input and output assignment58 En Decoder select modeDTS decoder prioritize setting 59 En Multi channel input setupDisplay settings Adisplay SET Front panel display scroll FL Scroll Source feature OSD display time60 En OSD shift OSD ShiftPress 8RETURN to exit from Start Pairing Bluetooth setting Ebluetooth SET7ENTER to start pairing 61 En62 En USB playback styles Fusb Play Style63 En Remote control featuresControlling this unit, a TV, or other components Controlling this unit64 En Controlling other componentsInput Component Manufacturer Default Setting remote control codesRemote control code default settings 65 EnScene IR code setting Scene IR Advanced setupBi-amplifier setting BI-AMP 66 En67 En TroubleshootingProblem Cause Remedy See General68 En 69 En 70 En Before Auto SetupDuring Auto Setup 3LEVEL Error After Auto Setup1OUT of Phase 71 EnDisconnected Access error72 En Unable to play73 En IPodBluetooth 74 EnAdvanced setup menu appears in the front panel display Remote controlResetting the system 75 EnGlossary 76 En77 En Virtual Cinema DSP Video signal78 En Specifications 79 EnNumerics Index80 En 81 En HeadphoneSubwoofer Phase 82 En83 En ConditionsFront panel AB C DRemote control List of remote control codes IiiLD player Tape DeckITT VCR KLH DSP-AX563 TV AV