Basic Operation

1. Tuning the Unit On / Off

Press any Button to turn the unit on, the dis- play will show a message WELCOME to in- dicate it is ready for use. Press the POWER button for 2 seconds to turn the unit off.

2. Mode Selection

Press the BAND Button to select Radio Mode. Press and hold the MOD/MUT But- ton to cycle the Play Mode between AUX, RADIO and CD PLAY.

Note: USB mode or memory card mode will only be displayed when a USB flash memo- ry or SD Card is inserted.

3.Loudness Control (head unit only) Press and hold the Volume Knob for 2 sec- onds, then press the Volume Knob repeat- edly to cycle through to “LOUD OFF”. Then rotate the Volume Knob to turn to “LOUD ON” for loudness to take effect.

4.Subwoofer Control

Press SUB/# Button on the front panel, or press the #/SUB Button on the remote con- trol to turn the subwoofer ON or OFF.

The unit must have an external amplifier in- stalled to drive the subwoofer.

5. Mute Control

Press and hold the MOD/MUT Button to mute the radio. Press and hold again to cancel. Note: If you press this button but do not hold it, it will change to another play mode.

6. Volume

Use the Volume Knob to adjust the volume level. The display shows VOL 00 to VOL 47. The larger the number, the higher the vol- ume level.

7. Bass

Press the Volume Knob until the display shows “BAS”. Use the Volume Knob to ad- just. When DSP is ON, bass control is not

available.

8. Treble

Press Volume Knob until the display shows “TRE”. Use the Volume Knob to adjust. When DSP is ON, treble control is not avail- able.

9. Balance

Press Volume Knob four times and the dis- play shows “BAL”, then use the Volume Knob to adjust the balance between the left & right speakers.

10. Fader

Press Volume Knob five times and the dis- play shows “FAD”, then use the Volume Knob to adjust the balance between the front & rear speakers.

11. Clock

The time clock can be set anytime when the power is on. Press the DISP Button and then press and hold DISP Button for 3 sec- onds, the time will blink on the display.

1.Press the VOL + Button to adjust the hour.

2.Press the VOL - Button to adjust the minute.

3.Press the DISP Button again or leave the unit idle for new setting to effect. Press the DISP Button anytime to view the time clock display.

12. Preset Beep Sound Off

1.Press the Volume Knob for 2 Seconds. The display will show “DSP OFF”, then press the Volume Knob repeatedly until the display shows “BEEP OFF”. Use the Vol- ume Knob to select “BEEP OFF” or “BEEP ON”, then leave the unit idle for setting to take effect.

13. Preset Equalizer Function

Press and hold the Volume Knob for 2 sec- onds, the display will show “EQ OFF”. Press the Volume Knob to choose the EQ sound effect desired.