Installtion, DIN FRONT-MOUNT Method a

Installtion

DIN FRONT-MOUNT (Method A)

	Bend the tabs
1. Dashboard	to secure the
	Mounting Sleeve
	in the dashboard.

3. Screw

2. Mounting

Sleeve

Fig. 1

After inserting the Mounting Sleeve into the dashboard, select tabs on top, bottom, and sides, then bend them to secure the mounting sleeve in the dash board.(Fig. 1)

Follow the diagram in Fig. 2 for installing the rear mounting strap to the head unit. The rear

mounting strap will help keep the head unit from moving

around inside the dashboard. Fig. 2

1.Dashboard

2.Nut (5mm)

3.Spring washer

4.Screw (5 x 25mm)

5.Screw

6.Strap

7.Plain washer

Insert fingers into the groove in the front of frame to remove it.

Insert the keys supplied with the unit in the grooves on both sides. The unit can be installed or removed from the dash- board using these keys.(Fig. 3)

Fig. 3

Remove the half sleeve

Remove the two transport screws from

the top of the unit before installing.