Recently Received Calls, Speed Dial | Roadmaster VR500CS-BT guide

Bluetooth Connection

10.Recently Received Calls

After connecting with cell phone;

1.Press the “PHONE” button.

2.Press and hold the Volume Knob until you see “OUT NUM”, then press the Volume Knob until the display shows “IN NUM”.

3.Press and hold the Volume Knob and the display will show the most recent received call.

4.Rotate the Volume Knob to choose among the 10 recent received numbers.

5.Press the Green “Phone” button to dial the displayed number.

11.Speed Dial

You can save up to 10 phone numbers in memory for Speed Dialing.

1.Press the “PHONE” button.

2.Press and hold the Volume Knob until you see “OUT NUM”.

3.Next press the Volume Knob to cycle through to “ADD NUM”.

4.Press and hold the Volume Knob and the display will show “NAME *”.

5.Use the Volume Knob to choose letters to compose name of up to 16 characters. Press and hold Volume Knob to confirm.

6.The display will show “NUMBER *”. Use the number buttons on the faceplate or the remote control to enter a telephone number of up to 32 digits.

12.Speed Dialing a Phone Number

1.Press the “PHONE” button.

2.Press and hold the Volume Knob until you see “OUT NUM”.

3.Then press the Volume Knob to cycle through to “FIND NUM”.

4.Press and hold the Volume Knob and the display will show your saved name.

5.Use the Volume Knob to choose the name and press the Green “PHONE” But- ton to call someone easily.

13.Disconnecting the Phone

Press and hold the Volume Knob until you see “OUT NUM”, then press the Volume Knob to cycle through to “DIS CONN”.

Press and hold to disconnect the current phone call so that you can connect with an- other call.

14. Ringtones

1.Press the “PHONE” button.

2.Press and hold the Volume Knob until you see “OUT NUM”.

3.Then press the Volume Knob to cycle through to “MELODY”.

4.Press and hold the Volume Knob and the display will show MELODY 1.

5.Rotate the Volume Knob to choose from MELODY 1 to 6 as different incoming music tone in the car radio.

6.Press and hold the Volume Knob to confirm after your desired Ringtone is dis- played.

15. Auto Re-Connect

This unit has an “Auto Re-Connect Func- tion”. In case the connected cellphone is out of range (e.g. the user leaves the car for lunch), the unit will automatically connect with the cell phone upon returning so that you do not have to re-set the connection.

16. BT-PLAY Stereo Transfer

The BT-PLAY function is for listening to mu- sic on the VR500CS-BT via Bluetooth from your cell phone. Play the music in the cell- phone, then choose the option of “play via bluetooth” in the cellphone.

Then press the MODE button in the radio until the display shows “BT-PLAY”. Note: BT-PLAY mode will only be displayed when you have activated the Bluetooth function on your cellphone. You can now listen to the music from the cellphone through the car speakers.

NOTE: It’s highly recommended that BT- PLAY mode should not be used simultane- ously with PHONE mode. Please quit BT- PLAY mode before attempting to make a phone call, unexpected results may occur, depending on different cellphone models.