Microphones, Built-In Microphone | Roadmaster VR500CS-BT specs

Installation

MICROPHONES

The VR500CS-BT has the ability to use two microphones. One microphone is built-in, the other is a remote microphone.

Built-In Microphone

The built-in microphone is located on the front right side of the unit. There is no setup required for this microphone and it is tuned to pick-up the voices of the front and rear

seat passengers.

Built-In Microphone (not visible)

Microphone Jack

The suppled microphone shall be used to ensure the sound quality of the driver’s voice.

Installation

The microphone jack is located on the front of the unit. Insert the plug of the supplied microphone into the microphone jack. Route the microphone and wire to the driver’s side sun visor, rear view mirror, or other area near the driver. Make sure that the microphone and wire do not interfere with the safe operation of the vehicle.

Setting the Microphone Volume

1.Press the “PHONE” button.

2.Press and hold the Volume Knob until you see “OUT NUM” on the LCD

3.Press the Volume Knob to cycle through the menu to “TEL”.

4.Rotate the Volume Knob to set the volume of the microphone.

GIVE US A CALL, WE'LL HELP YOU INSTALL.

PLEASE DO NOT RETURN PRODUCT TO STORE.

Visit us on the WEB

www.vr-3.com

For Information and Technical Assistance,

Call Toll-Free in U.S.A. and Canada.

1-800-445-1797