USB/SD/MMC Card Operation
Press the << Button to go to a previous track. Track numbers will be shown on the display. Press and hold the << Button to fast reverse. Disc will play normally when the >> or << Button is released.
memory, insert a USB flash memory into the USB port on the left side of the unit. The unit will start playing MP3/WMA files on the USB flash memory automatically. Or press the MODE Button to select USB after press- ing POWER Button to turn on the unit.
4. Play/ Pause CD
On the Remote or Head Unit, press the “BND•ID3” button to pause the CD. Press this button again to resume playback.
5. Resume All Tracks
On the Remote or Head Unit, press the 1/TOP Button to play the all the tracks again. The first song on the CD will be played.
6. Scanning Tracks
On the Remote or Head Unit, press the 2/INT Button to play the first 10 seconds of each track. Press this button again to resume playback.
SD/MMC Card
To play MP3/WMA files from a SD/MMC Card, insert a SD/MMC Card into the SD Card Slot on the left side of the unit. The unit will start playing MP3/WMA files on the SD/MMC Card memory automatically. Or press the MODE Button to select SD/MMC Card after pressing POWER Button to turn on the unit.
1. Play / Pause
When playing MP3/WMA in the USB drive, press the
7. Repeat
On the Remote or Head Unit, press the F/PS/RPT Button to repeat the same track continuously. “RPT ON” will appear on the display. Press this button again to stop repeating tracks
8. Random
On the Remote or Head Unit, press the 4/RDM Button to play all the tracks in ran- dom order. “RDM ON” will appear on the display. Press this button again to stop random play.
9. UP 10
Press the 6/UP10 Button to advance 10 tracks at a time.
10. DN 10
Press the 5/DN10 Button to go back 10 tracks at a time.
USB Flash Memory
To play MP3/WMA files from a USB flash
2. Selecting Tracks
If the MP3/WMA files are stored in folders on the USB drive or SD Card, the unit will start by playing the first song in the first folder.
After playing all the files sequentially in the first folder, the unit will play sequentially all of the files in the next folder. The unit will continue playing through all of the folders on the USB drive or SD Card in this manner. If the USB drive or SD Card has loose files and folders containing files, it will play the loose files sequentially, then it will play the files in the folders sequentially.
The 5/DN10 and 6/UP10 Buttons are used to advance ten tracks at a time or go back ten tracks at a time.
3. Resume All Tracks
On the Remote or Head Unit, press the 1/TOP Button to play the all the tracks again. The first song on the CD will be played.
17