Care and Maintenance, Sunlight/Heat, Cleaning

Finally, realize that even though the PV®115D is a powerful and high output unit, it does ultimately have limits, and it may need additional powered units (or a subwoofer) to provide enough sound output or coverage. In this case, try turning the mixer levels down a little to see if that clears things up.

If, after checking all the things listed and anything else you can think of to check safely, the system still exhibits problems, carefully note all conditions and check with your Peavey dealer for advice.

Care and Maintenance

Your PV®115D is a sturdy and durable product and will provide years of reliable use if properly cared for. Use common sense and read the safety warnings to avoid hazardous operating conditions.

The unit must be disconnected from the AC power source before any work is done on it. Refer all servicing to qualified service personnel.

Sunlight/Heat

Avoid prolonged exposure to direct sunlight, as this may cause the unit to overheat and thermally shut off.

Excessively hot operating conditions can also cause a thermal shutdown.

Do not store in extremely hot or cold conditions or extremely high humidity. Always allow unit to come to room temperature before use.

Cleaning

Never clean the PV®115D while plugged in or turned ON! When the unit has been fully disconnected from AC power sources, use a dry cloth or a plastic bristle brush to remove soil or other dirt. Never use strong solvents on the PV®115D, as they could damage the cabinet. Do not allow ANY fluids to drip inside the PV®115D.

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The powered loudspeaker system shall have a frequency response from 66 Hz to 17 kHz. The peak SPL with inaudible distortion shall reach 121 dB with music as a source, when measured at a distance of 1M and driven to full output capacity. The system shall utilize a heavy-duty 15” Peavey® Pro 15 model woofer, and a Peavey® RX™14 titanium diaphragm compression driver tweeter on a constant directivity horn. The nominal radiation pattern shall be 60 degrees in the horizontal plane and 40 degrees in the vertical plane.

The powered loudspeaker system shall have a medium impedance input connector consisting of one combo female XLR and 1/4” RTS phone jack on the rear panel. Output connections on the rear panel shall consist of a 1/4” phone jack providing link-out, which provides a pre-level control signal for the use of linking multiple PV®115D’s in a line, and one 1/4” phone jack speaker output, 8-ohm minimum load. A level control will be located next to the input jack. Next to the level control, a Contour Switch pushbutton will provide some bass and treble lift when engaged for improved listening at low levels.

The system power amplifiers shall have an unfiltered frequency response of 20 Hz to 20 kHz which deviates no more than +0, -3 dB up to rated power, a damping factor greater than 400 @ 1 kHz into 8 ohms, hum and noise better than 90 dB below rated power, and typical THD and IMD of less than 0.5%. The amplifier shall be capable of 400W continuous output into a 4 ohm nominal load and shall incorporate DDT™ compression.

The enclosure shall be constructed of MDF-type wood panels and be covered in black carpet. A pair of metal handles shall be provided on the sides, and a stand mount adaptor on the bottom for speaker stand use. A black-coated perforated metal grille shall be provided for speaker component protection. The cabinet shall incorporate 4 rubber feet for floor standing use.

The outside dimensions shall be 32.25” tall by 18.83” wide by 14.75” deep, and the weight shall be 56 lbs. Power requirements shall be a dual voltage range of : 100 to 120VAC, and 220 to 240VAC, 50 - 60 Hz, with a nominal power consumption of 370 watts. The voltage ranges shall be switch selectable on the rear panel. The loudspeaker system shall be called a Peavey® model PV®115D.

PV115D specifications

The Peavey PV115D is a powerful and versatile active loudspeaker designed for various applications, from live performances to DJ events and public speaking engagements. With its robust construction and innovative features, this speaker offers a professional sound experience tailored to meet the demands of today’s audio environments.

One of the standout features of the PV115D is its 15-inch heavy-duty woofer, which is designed to deliver deep and accurate bass response. This is coupled with a 1.4-inch titanium diaphragm compression driver that produces crystal-clear highs, ensuring that vocals and instrumentation are reproduced with stunning clarity. The combination of these components enables the speaker to handle a wide frequency range, making it suitable for diverse musical genres and audio content.

The PV115D is equipped with an onboard 300-watt peak power amplifier, which provides adequate headroom for high-volume applications. This built-in amplification eliminates the need for external amplifiers, simplifying setup and reducing gear complexity. Additionally, the speaker features a built-in EQ with preset configurations, allowing users to tailor the audio output to suit specific environments and preferences.

For connectivity, the PV115D includes multiple input options, such as XLR and 1/4-inch TRS inputs, making it compatible with a wide range of audio sources. The speaker also features a microphone input with dedicated volume control, enabling easy integration into live setups where vocal reinforcement is needed.

Durability is a hallmark of the PV series, and the PV115D is no exception. It is housed in a sturdy, textured polypropylene enclosure designed to withstand the rigors of transport and use in various settings. Moreover, the speaker is equipped with a robust, perforated metal grill that protects the drivers while allowing for optimal sound dispersion.

Another advantageous aspect of the PV115D is its lightweight design, which makes it easier to transport and set up. Its integrated handles enhance portability, allowing users to move it with ease, whether for rehearsals, gigs, or events.

In conclusion, the Peavey PV115D is a feature-rich active loudspeaker that offers exceptional sound quality, efficient performance, and robust construction. With its powerful amplifier, versatile connectivity options, and tailored sound shaping, it stands out as an ideal choice for audio professionals and enthusiasts alike.