Peavey manual Peavey PV115D Specifications, Electro-acoustic Crossover Frequency 3 kHz

Page 23

PEAVEY® PV®115D - SPECIFICATIONS

Frequency Range: 1 meter on-axis, swept-sine in 1/2 Space

environment, -10 dB: 46 Hz to 21 kHz

Frequency Response: 1 meter on-axis, swept-sine in 1/2 Space environment 66 Hz to 17 kHz (± 3 dB)

Sensitivity (1w/1m): 95 dB

Maximum Peak SPL: 121 dB

Transducer Compliment: Transducer Compliment: Heavy-duty 15” woofer with 2 3/8” voice coil & 50 oz. magnet. RX14 1.4” titanium diaphragm dynamic compression driver, on a Constant Directivity 60 X 40 horn.

Nominal Coverage Pattern: 60 degrees horizontal by 40 degrees vertical

Electro-acoustic Crossover Frequency: 3 kHz

Input Connections: One combo female XLR/ 1/4” phone jack providing balanced or unbalanced operation.

Enclosure Materials & Finish: Trapezoidal, black carpet covered 12mm MDF, black powder-coated full length perforated steel grille.

Mounting or Suspension: Steel 1 3/8” pole-mount cup for stand mounting, four rubber feet for floor use.

NOTE: This unit is not designed for overhead suspension!

Dimensions (H x W x D):

Front: 32.25 in. x 18.83 in. x 14.75 in. 819 mm x 478 mm x 375 mm

Rear: 32.25 in. x 11.25 in. x 14.75in. 819 mm x 286 mm x 375 mm

Weight:

56 Lbs. (25.4 kg)

ELECTRONICS AND AMPLIFIER SPECIFICATIONS:

Power Amp Rating, Total Power Output: 800 watts peak available

power, Continuous Power: 400 watts into 4 ohms @ less than 1% distortion

Electronic Input Impedance (Nominal): 2.7 k ohms balanced (XLR or 1/4”), 1.35 k ohms unbalanced 1/4”.

Infrasonic filter protection: 24 dB/octave roll-off

Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz

Hum and Noise: Greater than 90 dB below rated power

DDT Dynamic Range: Greater than 14 dB

THD and IM: Typically less than 0.5 %

Damping Factor: Greater than 400 @ 1000 Hz, 8 Ohms

Power requirements of Peavey PV®115D System: Nominal 370

Watts, Voltage and Frequency Ranges: 100-120 VAC, and 220 – 240VAC, at 50- 60 Hz

Fuse Type:

For 100-120 VAC USE: International fuse classification T6.3AL . In the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.

For 220-240 VAC USE: International fuse classification T3.15AL . This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15 amp 250V rating.

23

Image 23
Contents PV115 D Deutsch 人体への電気ショックの危険が考えられる製品筐体内の非絶縁「危険電圧」の存在をユーザーに警告す るものです。 ⁄4 or less Important Safety InstructionsDuration Per Day In Hours Sound Level dBA, Slow Response ⁄ 4 o menos Guarde Estas InstruccionesInstrucciones Importantes Para SU Seguridad Niveau sonore moyen dBA Gardez CES InstructionsInstructions Importantes DE Securite Wichtige Sicherheitshinweise Bewahren SIE Diese Sicherheitshinweise AUFTärkeät Turvallisuusohjeet Säilytä Nämä OhjeetViktiga Säkerhetsinstruktioner Spara Dessa Instruktioner⁄4 o minore 115 Conservate Queste IstruzioniImportanti Norme DI Sicurezza Instruções Importantes DE Segurança Guarde Essas Instruções本書は保管してください 请妥善保管本说明书! ¼ 이하 일별 지속 시간 소음 수준 dBA, 저속 반응Applications FeaturesChanging the Voltage Range of the PV115D Voltage Selector Switch2a Fuse IEC Power Cord ConnectionON-OFF Switch Input Jack Contour SwitchPOWER/CLIP LED Speaker OUT JackLevel Control Adjustment Connecting AC Power To The PV115DConnecting a Signal to the PV115D Use of the PV115D with a Speaker Stand Using the Speaker OUT jackUse of the PV115D with a powered Subwoofer USE with a Passive ADD-ON SubwooferDistorted or Fuzzy Sound TroubleshootingNo Output at All Hum or BuzzSunlight/Heat Care and MaintenanceCleaning Architectural and Engineering SpecificationsElectro-acoustic Crossover Frequency 3 kHz Peavey PV115D SpecificationsPage Page Peavey Electronics Corporation Limited Warranty Customer warranty registration Corporation Electronics Peavey From

PV115D specifications

The Peavey PV115D is a powerful and versatile active loudspeaker designed for various applications, from live performances to DJ events and public speaking engagements. With its robust construction and innovative features, this speaker offers a professional sound experience tailored to meet the demands of today’s audio environments.

One of the standout features of the PV115D is its 15-inch heavy-duty woofer, which is designed to deliver deep and accurate bass response. This is coupled with a 1.4-inch titanium diaphragm compression driver that produces crystal-clear highs, ensuring that vocals and instrumentation are reproduced with stunning clarity. The combination of these components enables the speaker to handle a wide frequency range, making it suitable for diverse musical genres and audio content.

The PV115D is equipped with an onboard 300-watt peak power amplifier, which provides adequate headroom for high-volume applications. This built-in amplification eliminates the need for external amplifiers, simplifying setup and reducing gear complexity. Additionally, the speaker features a built-in EQ with preset configurations, allowing users to tailor the audio output to suit specific environments and preferences.

For connectivity, the PV115D includes multiple input options, such as XLR and 1/4-inch TRS inputs, making it compatible with a wide range of audio sources. The speaker also features a microphone input with dedicated volume control, enabling easy integration into live setups where vocal reinforcement is needed.

Durability is a hallmark of the PV series, and the PV115D is no exception. It is housed in a sturdy, textured polypropylene enclosure designed to withstand the rigors of transport and use in various settings. Moreover, the speaker is equipped with a robust, perforated metal grill that protects the drivers while allowing for optimal sound dispersion.

Another advantageous aspect of the PV115D is its lightweight design, which makes it easier to transport and set up. Its integrated handles enhance portability, allowing users to move it with ease, whether for rehearsals, gigs, or events.

In conclusion, the Peavey PV115D is a feature-rich active loudspeaker that offers exceptional sound quality, efficient performance, and robust construction. With its powerful amplifier, versatile connectivity options, and tailored sound shaping, it stands out as an ideal choice for audio professionals and enthusiasts alike.