so you can recall it later. You can store two FSM (favorite sound memory) settings.
Follow these steps to store an FSM setting.
1.Repeatedly press FSM until FSM I or FSM II appears.
(illus)
2.Adjust the volume, bass, treble, balance and fader using the infor- mation in “Adjusting the Sound” on Page 17.
Note: FSM I or FSM II blinks while you adjust the controls.
3.When you finish adjusting the ste- reo’s settings, hold down FSM until the stereo beeps twice. This indi- cates that the settings you entered are saved in the FSM set- ting you selected.
To select an FSM setting you saved, repeatedly press FSM until FSM I or FSM II appears. The stereo is set to those settings you entered in Step 2.
To turn off FSM, repeatedly press FSM until FSM I and FSM II disappear from the display. The stereo is set to its default settings.
CLOCK
While the radio or a CD is playing, press CLOCK to display the clock.
(new illus)
TURNING THE KEY TONE ON AND OFF
The stereo is preset to beep when you press most buttons. To turn the key tone off, turn the stereo off, then hold down ATP (automatic travel program- ming) and 6 together for about 3 sec- onds until bP (beep) OFF appears.
To turn the key tone back on, turn the stereo off, then hold down ATP and 6 together for about 3 seconds until bP ON appears.
(illus)
DISPLAYING THE
18