USING THE CONTROL PANEL
The stereo’s control panel must be in place for the stereo to operate. When you remove it, the display turns off and the stereo cannot be used. This is a simple but effective security mea- sure.
Any stored stations remain in memory when the control panel is removed.
REMOVING THE
CONTROL PANEL
1.Press RLS. You hear a click and the control panel swings out.
(illus - show control panel swing)
INSTALLING THE
CONTROL PANEL
1.Insert the left edge of the control panel into the left edge of the recess. The hole in the control panel interlocks with the tab in the recess.
2.Remove the control panel, then store it in the supplied carry case.
(illus)
(illus - show pin in recess hole)
2.Gently push the right edge of the control panel into the recess until you hear a click.
Caution: To keep the metal connect- ing pins clean, do not touch the con- necting pins in the recess or on the back of the control panel.
15