REMOVING THE STEREO FROM THE DASH
If you ever want to remove the stereo from the dash, follow these steps.
1.Disconnect the cable from your vehicle’s negative (– ) battery ter- minal.
2.If you secured the stereo to an existing mounting hole under the dash, slide out the stereo to free the mounting bolt from the mount- ing hole.
Or, remove the bolt holding the metal strap attached to the back of the stereo.
3.Press RLS to remove the stereo’s control panel.
14
4.Insert the supplied keys into the slots at the left and right sides of the stereo. Press the keys down- ward and slide the stereo out of the dash.
(illus - show keys on slots)
Note: The keys are labeled to show their top edges.
5.Remove the keys from the slots.
6.Disconnect the wire harness and the antenna.
7.If you are mailing or shipping the stereo, use a Phillips screwdriver to reinstall the shipping screw in the top of the stereo.
8.Reconnect the cable to the vehi- cle battery’s negative