Sanyo FXD-780RDS operating instructions Error Signs, CD Error, Meck ERR, Message Cause Remedy

ERROR SIGNS

If a problem should occur while operating the CD player, one of the following error signs may be displayed. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your nearest dealer.

Message	Cause	Remedy
	Dirty disc.	Clean the disc.
	Scratched disc.	Replace the disc.
	Up-side-down.	Check the disc.
	Focus error.	Try ejecting and re-inserting
CD ERROR		under normal temperature
		conditions.
	Data and focus error.	Under normal temperature
		conditions, eject and insert
		clean, undamaged disc
		properly.
MECK ERR.	Mechanical problem.	Eject and re-insert.

ERROR SIGNS (CD changer)

If a problem should occur while operating the CD changer, one of the following error signs may be dis- played. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists or “MECA ERR” and “09 ERROR” appears, contact your nearest dealer.

Message	Cause	Remedy
NO MAGA	No magazine.	Load the magazine in
NO DISC	No disc.	the CD changer.
		Check the disc.
CD ERROR	Up-side-down.	Check the disc.
COMM ERR	Communication error	Check the connection of
		the CD changer.
	Excessive temperature	The error sign will go off
TEMP ERR	conditions at the CD	and play will resume
	changer.	when the temperature at
		the CD changer returns
		to a normal range.

GB–18