Sanyo FXD-780RDS Detachable Front Panel, HOW to Attach the Front Panel, Security Indicator

Page 5

DETACHABLE FRONT PANEL

The front panel is designed to be removable for antitheft purposes.

It is recommended that you remove and carry the front panel with you when you leave your car.

HOW TO ATTACH THE FRONT PANEL

Align the right side of the panel with the stopper, and then push the left side of the panel into the unit until it clicks.

HOW TO DETACH THE FRONT PANEL

Press the release button (REL) to release the front panel.

Pull the entire panel to remove it from the unit.

RETURNING TO THE INITIAL SETTINGS

When the eject button is pressed for more than 10 seconds, the micro- computer of the unit returns to the initial settings. If the display window is not properly shown or the unit malfunctions, press the eject button for more than 10 seconds.

Note

The unit will not operate if it is installed incorrectly.

CAUTION

Do not attempt to remove the panel in a manner other than that described above.

When installing the panel, do not force it into the unit.

Do not touch the connection terminals of the panel or the unit. It may cause poor contact.

Use a clean, dry cloth when cleaning the terminals.

Keep the panel out of direct sunlight and high temperatures.

Prevent the panel from coming into contact with benzene, thinner, or in- secticides.

Do not drop the panel.

SECURITY INDICATOR

When the front panel is detached, you can find an RED indicator on the front side of the unit. This indicator designed to deter theft, and continues to flash.

This unit is not equipped with any other security systems such as a security alarm, so there are limitations to its effectiveness.

Security system indicator

GB–4

Image 5
Contents FXD-780RDSwith CD Changer Control Contents Recommended CD-R Media Compact Disc CareBAS-X Digital DisplayREG PTY HOW to Detach the Front Panel HOW to Attach the Front PanelReturning to the Initial Settings Security IndicatorVolume Level Control Turning the Power onSetting the Clock General OperationAdjusting the Sound Switching the DisplayLoudness Effect LOCAL/DISTANTLO/DX SelectionEnhancing the Bass Sound BAS-X IGNITION-OFF Clock Recall Adjusting the Sound StageTEL Mute Function To Memory the Sound StageRadio Tuning Selecting Radio ModeStoring Preset Stations Radio OperationScan Operation ATP Auto Travel Preset OperationPreset Scan Operation Selecting TA Mode Selecting AF ModeRDS Operation Changing the Displayed ItemsPresetting the Volume of Traffic Announcements Automatic RE-TUNINGReceiving Traffic Announcements Selecting REG on or REG OFFProgramme types Display Locating a Station with PTYCD Operation Switching to CD ModeLoading and Ejecting the CD Skipping TracksPlacing the CD in Pause Mode Scan Mode Playing the BeginningRepeat Mode Shuffle ModeSelecting a Disc Putting the CD in Pause ModeCD Changer Operation Scan Mode Playing the Beginning of Tracks or Discs Repeat ModeCD Error Error SignsMeck ERR Message Cause RemedyHints for Proper and Safe Operation Symptom Cause Solution TroubleshootingInstallation Accessories and HardwareInstallation Before InstallationUnit Removal Installation ProceduresFire Wall Dash BoardElectrical Connections WiringReplacing the Fuse Line OUT ConnectionsCD Changer DIN Socket RCA Line- out Jacks For Rear Speakers