SWITCHING THE DISPLAY | 3 |
Each time you press the AUDIO button 3, the item changes as follows ;
Initial set
↓
PS ➔ Frequency ➔ PTY ➔ Clock ➔ BAS ➔ TRE ➔ LOUD ➔ BAL ➔ FAD ➔ Mute level ➔ LO/DX
DISPLAY PRIORITY SELECTOR | 3 |
You can adjust with which priority items are to be displayed. Display priority can be set for the following | |
four items ; |
|
• PS (Programme Service name) | • PTY (Programme Type) |
• Frequency | • Clock |
Press the AUDIO button 3 until your requested item being displayed, then hold the AUDIO button 3 pressed | |
for more than 2 seconds (Beep tone will be heard) to set priority to the item. | |
ADJUSTING THE SOUND |
|
CHARACTERISTICS | 2, 3 |
1.Each time you press the AUDIO button 3 until the desired mode is displayed.
2.Rotate the VOL dial 2 to adjust the selected item. Make the adjustment within 5 seconds after selecting. After 5 seconds, the display window will revert to display priority.
•MUTE LEVEL controls the volume level used when the sound is muted. You can adjust the level by the volume is reduced from the previous volume level.
|
| Adjustment Range |
|
|
|
| |
BASS (BAS 0) | BAS | BAS +5 | |
|
|
| |
TREBLE (TRE 0) | TRE | TRE +5 | |
|
|
| |
LOUDNESS (LOUD OFF) | LOUD ON | LOUD OFF | |
|
|
|
|
BALANCE (L 0:R 0) | BAL | L9 R0 (Full left) | BAL L0 R9 (Full right) |
|
|
|
|
FADER (R 0:F 0) | FAD | R0 F9 (Full front) | FAD R9 F0 (Full rear) |
|
|
| |
MUTE LEVEL (MUTE | MUTE – 0 | MUTE | |
|
|
| |
Local/DX(SENS DX) | SENS DX | SENS LO | |
LOUDNESS EFFECT
When listening to music at low volume levels, this feature will boost the extremes of the bass and treble ranges to compensate for the negative characteristics of human hearing.
LOCAL/DISTANT(LO/DX) SELECTION
This feature is used to select the strength of the signals at which the radio will stop during Automatic Tuning. Select the Local (LO) setting and only the strongest (local) stations will be received. The “LOC” indicator appears in the display window.
Select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The “LOC” indicator will go out on the display window.