Initialization (Reset)/Functional Restriction Setting (FUNCTION)
You can return the settings to their
1.Hold down the [MENU/ENTER] button and [INPUT/ RETURN] button at the same time until “F” appears in the screen, and then press the [MENU/ENTER] button and 
] button at the same time while “F” appears.
FUNCTION
▲ | ALL RESET |
| ▲ | OFF | ▲ |
| ADJUSTMENT LOCK | ||||
| ▲ | UNLOCKED | ▲ | ||
| OSD DISPLAY | ▲ | ON 1 | ▲ | |
| LED | ▲ | ON | ▲ | |
| TEMPERATURE ALERT | ▲ ▲ | OFF | ▲ ▲ | |
| STATUS ALERT | OFF | |||
|
| OK…[ENTER] | END…[RETURN] | ||
2. Select and set the items.
ALL RESET
Resets the settings to the factory default settings. Select ALL RESET, and then press [MENU/ENTER] button.
After initialization, turn the main power switch off and then back on.
ALL RESET ......Resets all the settings to the factory
default settings.
CANCEL...........Go back without resetting.
ADJUSTMENT LOCK
You can disable operations on the monitor buttons. OFF ...Enables operation.
ON 1 ..Disables all operations other than turning power on/off and FUNCTION.
ON 2 ..Only the FUNCTION operation is enabled. Disables all operations other than FUNCTION (not even power on/off).
Specifies whether to allow control via
OSD DISPLAY
Shows/hides the menu, modes and messages. The FUNCTION screen cannot be hidden.
ON 1 | Shows all menus, modes and messages. |
ON 2 | Hides messages automatically displayed |
| by the display. Shows messages during |
| operation. |
OFF | Hides all menus, modes and messages. |
LED
Specifies whether to light the power LED.
TEMPERATURE ALERT
Selects the notification method for an abnormal
temperature. |
|
OFF | Do not notify about an abnormal |
| temperature. |
OSD & LED .. When an abnormal temperature is | |
| detected, the power LED flashes in red |
| and green alternately and the screen |
| displays a message: TEMPERATURE. |
LED | When an abnormal temperature is |
| detected, the power LED flashes in red |
| and green alternately. |
STATUS ALERT | |
Selects the notification method for a hardware error.
OFF | Do not notify about the error. |
OSD & LED .. When a hardware error is detected, the
| power LED flashes in red and the screen |
| displays a message: STATUS [xxxx]. |
LED | When a hardware error is detected, the |
| power LED flashes in red. |
3.Press [INPUT/RETURN] button to return to the normal screen.
TIPS
•When both abnormal temperature and hardware error are detected, the hardware error notification overrides.
•If TEMPERATURE ALERT or STATUS ALERT is set to OSD & LED, alert messages will appear even if the OSD DISPLAY is set to ON 2 or OFF.
•If TEMPERATURE ALERT or STATUS ALERT is set to LED or OSD & LED, the LED lights even if the LED function is set to OFF.