Sharp PN-K321 operation manual Safety Precautions

Page 5

SAFETY PRECAUTIONS (Continued)

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal and DisplayPort input terminal.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using fixing devices like wall mount brackets recommended by the manufacturer.

Only using furniture that can safely support the monitor.

Ensuring the monitor is not overhanging the edge of the supporting furniture.

Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.

Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

Especially for child safety

-Don’t allow children to climb on or play with the monitor.

-Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by curious children.

5 E

Image 5
Contents PN-K321 Page Important Information Refer Servicing to Qualified Service PersonnelDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationBack FrontSupplied Components ContentsPart Names Attachment plate for stand Brightness adjustment buttonNFront view NRear viewNAttaching the stand Installing the stand suppliedAdjusting the height Installing the stand supplied NHeight/angle adjustmentAdjusting the angle 11 EConnecting Peripheral Equipment 13 E Connecting the Power CordNStoring the cables Binding CablesNFastening the cables 15 E Turning Power On/OffPower lamp status Status of the monitor Basic Operation 17 E Basic Operation NSwitching the screen sizeWide Normal Dot by DotNExample of operation Menu ItemsNMenu screen display ContrastNPICTURE 19 EMenu Items NPbyP Menu Items NSETUPNMONITOR Menu Items NOTHERS 21 ENHDMI Dual Menu Items NDual screen displayPbyP HDMI1 HDMI223 E Volm NCommand formatControlling the Monitor with a PC RS-232C When a command has not been executed When a command has been executed correctlyIf execution of the command is taking some time 25 EControlling the Monitor with a PC RS-232C Power control/Input mode selectionHow to read the command table Controlling the Monitor with a PC RS-232C Picture menu 27 EMonitor menu Controlling the Monitor with a PC RS-232C Setup menuPbyP menu Others menuOthers 29 ETroubleshooting NProduct Specifications Specifications31 E Vesa DDC2BUnit inch mm Specifications NDimensional DrawingsScreen resolution Vsync DisplayPort Specifications NCompatible signal timing PC33 E HDMI1 Hdmi Dual *1NDDC plug and play Specifications NCompatible signal timing AVNPower management Specifications NPC/AV Hdmi input terminal pins NDisplayPort input terminal pinsHdmitm Connector 35 ENRemoving the attachment plate NToppling preventionTop of monitor Back of monitorPN-K321 Ma EN13D3