Quick guide
Before turning on the power
*
nStandard DIN45325 plug (IEC
o AC cord (Product shape varies in some countries)
*The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type causes unnecessary electrical wave emissions or interference.
Place the TV close to the AC outlet, and keep the power plug within reach.
Supplying power to the antenna
When an active antenna is used, power must be supplied to the antenna using the following procedures after connecting the antenna cable to the antenna terminal on the rear of the TV in order to receive terrestrial digital signals.
1Press @ and the “MENU” screen displays.
2 Press c/dto select “Setup”.
3 Press a/bto select “Antenna Setup”, and then press ;. 4 Press a/bto select “Supply Voltage”, and then press ;. 5 Press c/dto select “On”, and then press ;.
Mounting the TV on a wall
•This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 5). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
•Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
•You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
•When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting the TV on the wall.
AN-37AG5
8