Sharp LC-32DH57S Connecting a PC, Displaying a PC image on the screen, Selecting the picture size

Connecting a PC

Connecting a PC

HDMI Connection

PC HDMI 1, 2 or 3

￿

nHDMI-certified cable

PCHDMI 2*

	￿
	￿
o DVI/HDMI cable	p ø 3.5 mm stereo
	minijack cable

*When using the HDMI 2 terminal, you must select the proper item in the “PC Audio Select” menu depending on the type of HDMI cable connected (Refer to page 19 for details).

Analogue Connection

PCEXT 4*

￿
￿
q RGB cable	r ø 3.5 mm stereo
	minijack cable
PC	EXT 4*
￿
￿
s DVI/RGB conversion	t ø 3.5 mm stereo
cable	minijack cable

*When using the EXT 4 terminal, you must select “EXT 4 (RGB)” in the “PC Audio Select” menu (Refer to page 19 for details).

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 30 for a list of PC signals compatible with the TV.

•When connecting to a PC, the input signal type is automatically detected.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.

1Press f.

• The “WIDE MODE” menu displays.

2Press f or a/bto select a desired item.

EXAMPLE

Normal	Full
	Item
Full	An image fully fills the screen.
Cinema	For letterbox pictures. Bars may appear on the
	top and bottom with some programmes.
Normal	Keeps the original aspect ratio in a full screen
	display.
Dot by Dot	Displays an image with the same number of
	pixels on the screen.

NOTE

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

•Refer to page 23 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

ANALOGUE RGB: 576p/720p (60 Hz)/1080i/1080p

25