Watching TV
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV.
Switch it off by pressing a on the TV.
Standby mode
ETo standby mode
If the TV is switched on, you can switch it to standby by pressing B on the remote control unit.
ESwitching on from standby
From standby, press B on the remote control unit.
TV indicator status
B (Standby/On | Status | |
indicator) | ||
| ||
Off | Power off | |
|
| |
Green | Power on | |
|
| |
Red | Standby | |
|
|
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•A small amount of electric power is still consumed even when a is turned off.
Switching between digital and analogue broadcasts
Watching digital |
| Watching analogue |
broadcasts |
| broadcasts |
|
|
|
001 to 900 ch |
| From 901 ch |
NOTE
•If the TV cannot search digital broadcasts, the analogue broadcasts are set from 001 channel.
Changing channels
With :r/s: | With 0_9: |
Selecting an external video source
Once the connection is made, |
|
| ||
press b to display the “INPUT | INPUT SOURCE | |||
TV | ||||
SOURCE” screen, and then press | ||||
EXT1 | ||||
b or a/bto switch over to |
| |||
| EXT2 | |||
the appropriate external source |
| |||
with ;. | EXT3 | |||
|
|
|
| |
|
|
|
| |
Selecting a sound mode
EFor DTV
If multi sound modes are received, each time you press
;the mode switches as follows.
Audio (ENG) : STEREO
L/R 
L 
R 
LR
Audio (ENG) : CH A
Audio (ENG) : CH B
Audio (ENG) : MONO
Press c/dto select L or R sound when the STEREO or DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R | L | R | LR | |
NOTE
•The sound mode screen disappears in six seconds.
•Selectable items vary depending on the received broadcasts.
EFor ATV
Each time you press ;, the mode switches as shown in the following tables.
| NICAM TV broadcasts selection | |
Signal |
| Selectable items |
|
|
|
Stereo |
| NICAM STEREO, MONO |
|
|
|
Bilingual |
| NICAM CH A, NICAM CH B, NICAM CH AB, MONO |
|
|
|
Monaural |
| NICAM MONO, MONO |
|
|
|
| A2 TV broadcasts selection |
Signal | Selectable items |
|
|
Stereo | STEREO, MONO |
|
|
Bilingual | CH A, CH B, CH AB |
|
|
Monaural | MONO |
|
|
NOTE
• When no signal is input, the sound mode will display “MONO”.
10