Basic adjustment
Additional Search
Use this menu to add new channels automatically after auto installation has been completed.
Channel Edit
This menu allows you to reconfigure some settings for the channel currently selected.
Label
When a TV channel sends its Network Name, the “Auto Installation” detects the information and assigns a name to it. However, you can change channel names individually.
1Press a/b/c/dto select each character
of the new name for the channel, and then press ;.
2Repeat step 1 above until the name is fully spelt out.
NOTE
•The name can be six characters or less.
•If a channel name is less than six characters, select “END” to set the channel name.
Frequency
You can adjust the frequency to the desired position (only for analogue channels).
NOTE
•Adjust while checking the background picture as a reference.
•You can set the frequency by pressing c/d. Each time you press cor d, the value is changed in increments of 0.05 MHz.
Colour System
Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”, “NTSC”) (only for analogue channels).
Sound System
Select the optimum sound systems (Broadcasting systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”, “A2 D/K1”, “I”, “L”, “L’”) (only for analogue channels).
Channel Skip
Channels with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit.
1Press a/bto select the desired channel.
2Press ;to set a ✔ mark at the channel that you want to skip.
Channel Sort
The item position of channels can be sorted.
1 Press a/bto select the channel whose item | |||
position you want to move, and then press | |||
;. |
|
| |
| Channel | Channel | Channel |
| Number | Name | Sort |
DTV | 006 | Monosco | ✔ |
DTV | 007 | Monosco |
|
2 Press a/bto move it to the desired position, | |||
and then press ;. |
| ||
| Channel | Channel | Channel |
| Number | Name | Sort |
DTV | 006 | Monosco |
|
DTV | 007 | Monosco |
|
3 Repeat steps 1 and 2 until all desired channel | |||
items are sorted. |
|
Decoder
When connecting a decoder to the TV, you need to select channels that need to be decoded.
Channel Lock
When the channel is locked, you must enter your PIN whenever you tune to the channel.
NOTE
•See “Child Lock” for setting a PIN.
•When “Channel Lock” is set for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.
•When pressing RETURN while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “Child Lock” temporarily until the power is turned off.
21