Sharp LC-32DH57S Appendix, Troubleshooting, Information on the software license for this product

Appendix

Troubleshooting

	Problem	Possible Solution
•	No power.	• Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B.
		• Is the AC cord disconnected?
		• Check if you pressed a on the TV.
• The TV cannot be operated.		• External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate
		the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes.
• Remote control unit does not operate.		• Are batteries inserted with polarity (e, f) aligned?
		• Are batteries worn out? (Replace with new batteries.)
		• Are you using it under strong or fluorescent lighting?
		• Is a fluorescent light illuminating to the remote control sensor?
• Picture is cut off.		• Is the image position correct?
		• Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Pages 23 and 25)
• Strange colour, light colour, or dark colour,		• Adjust the picture tone.
	or colour misalignment.	• Is the room too bright? The picture may look dark in a room that is too bright.
		• Check the “Colour System” setting (Page 21).
• Power is suddenly turned off.		• The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
		• Is sleep timer set? Set to “Off” by pressing SLEEP on the remote control unit (Page 3).
		• Is “No Signal Off” or “No Operation Off” activated?
•	No picture.	• Are connections to external equipment correct? (Pages 13_14)
		• Is the correct input source selected? (Page 10)
		• Is a non-compatible signal being input? (Page 28)
		• Is the picture adjustment correct? (Pages 17_18)
		• Is the antenna connected properly? (Page 8)
		• Is “On” selected in “Audio Only”? (Page 19)
•	No sound.	• Is the volume too low?
		• Make sure that headphones are not connected.
		• Check if you pressed e on the remote control unit.
		• Is the proper item selected in the “PC Audio Select” menu when connecting devices to the HDMI 2 terminal or
		the EXT 4 terminal? (Pages 13 and 19)
• The TV sometimes makes a cracking		• This is not a malfunction. This happens when the cabinet slightly expands and contracts according to changes
	sound.	in temperature. This does not affect the TV’s performance.

Cautions regarding use in high and low temperature environments

•When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature returns to normal.

•Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this

may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: e5 °C to e35 °C.

Information on the software license for this product

Software composition

The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.

Software developed by SHARP and open source software

The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a BSD-like License or other license agreement.

We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed.

Acknowledgements

The following open source software components are included in this product:

• Freetype • unicode • Teletext font • libpng • zlib

29