Sharp LED TV operation manual Initial teletext page DTV only, MHEG-5 EPG DTV only, Enable, Disable

Watching TV

View setting

Initial teletext page (DTV only)

If you set the language of the initial page (this page is displayed for the first time after pressing m) for teletext in DTV mode, it will start from the selected language page.

1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Initial teletext page”.

2Press a/b/c/dto select the desired language, and then press ?.

NOTE

•This function is available for teletext in DTV mode. This is not available for teletext in ATV or external input mode.

•If the initial teletext page of the selected language in this function is not included in a received broadcast, the default initial page will be displayed.

View setting

MHEG-5 (EPG) (DTV only)

This function is set to enable MHEG-5 in DTV mode.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “MHEG-5 (EPG)”.

	Item
Enable	MHEG-5 is displayed during DTV mode.
Disable	MHEG-5 is not displayed during DTV
	mode.

NOTE

•This function is only displayed for models for the New Zealand market. This function is not displayed for models for the other market than “New Zealand”.

•When the country setting is set to “New Zealand” in the initial auto installation, this function is available. When the country setting is set to countries other than “New Zealand”, then this item is grayed out and cannot be selected.

•The MHEG-5 is not displayed when there is no MHEG-5 information on broadcast in setting this function to “Enable”.

•When this function is set to “Enable”, subtitles may not be displayed. If this occurs, set to “Disable” and then display of subtitles will be possible.

23