Sharp LED TV Useful viewing functions, Sort, Erase programme, TV Start-up time setting

Basic adjustment Useful viewing functions

Label

When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually.

Select each character of the new name for the channel with using the software keyboard (see page 16).

NOTE

•The name can be five characters or less. Select “Cancel” to set the channel name.

Skip

Channels with “Skip” set to “On” are passed over when using CHr/seven if selected while watching the image from the TV.

Lock

You can block the viewing of any channel.

NOTE

•See page 45 for setting a password.

•When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.

•When pressing Cwhile “Child lock has been activated” displays, the password input window will display. Inputting the correct password unlocks the “Password” temporarily until the power is turned off.

Sort

Channel positions can be sorted freely.

1Press c/dto select “Yes”, and then press ?.

2Press a/b/c/dto select the channel you want to move, and then press ?.

3Press a/b/c/dto move it to the desired position, and then press ?.

4Repeat steps 2 and 3 until all desired channels are sorted.

Erase programme

Channels can be erased individually.

1Press c/dto select “Yes”, and then press ?.

2Press a/b/c/dto select the channel you want to erase, and then press ?.

• A message window pops up.

3Press c/dto select “Yes”, and then press ? to erase the selected channel. All the subsequent channels move up.

4Repeat steps 2 and 3 until all desired channels are erased.

TV Start-up time setting

Option

Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Quick start”.

Item

	The TV quickly starts up from standby.
	24W or more of power consumption is
On	required during standby. If you connect
	additional peripherals eg. USB / HDMI,
	the power consumption could rise to
	50W.
On (Wallpaper)	The TV enters wallpaper mode when in
	standby condition.
Off	Power consumption is small during
	standby.

44