Sharp LED TV Introduction, Precautions For Daily Use, Important safety precautions

Page 5

Introduction

Precautions For Daily Use

Observe the following items

Maintenance of the cabinet

When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently.

Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack.

Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.

If the cabinet is greatly soiled, clean with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of diluted neutral detergent and wrung out, and then clean with a soft dry cloth.

Solvents such as benzene or thinner could cause the cabinet to deteriorate, or make its coating come off. Therefore do not use such solvents to clean the cabinet.

Because plasticizer is included in the plastics, deterioration or the coating peeling off could occur when the cabinet comes into contact with some substances. Therefore keep it away from volatile substances such as insecticide. In addition, do not let it come into contact with objects made of rubber, resin, etc. for a long time.

Maintenance of the LCD panel

Before cleaning the LCD panel, be sure to turn off the TV set and unplug the power cord from the outlet.

When cleaning the LCD panel, use a dry and soft cloth (made of cotton, floss, etc.) to clean the surface of the LCD panel gently. For protecting the LCD panel, do not clean with a dirty cloth, detergent, or a dry or damp rag mixed with chemicals, as this could cause peeling of the panel surface.

Be careful not to clean with an abrasive cloth or with excessive force, as this could cause the panel surface to be scratched.

If the LCD panel is greatly soiled, clean it gently with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of water (Do not clean with excessive force, so as to avoid the scratch of the panel surface).

If dust sticks on the surface of the LCD panel, clean the panel with a commercially available cleaning brush (anti-static brush).

Important safety precautions

Caring for the cabinet

Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.

Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.

The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.

Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.

When relocating the product placed on a cart, it must be moved

with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

Caring for the front panel

Turn off the main power and unplug the AC cord from the wall outlet before handling.

Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.).

To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.

Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may scratch the surface of the front panel when wiped strongly).

If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

3

Image 5
Contents LC-90LE760X Page Dear Sharp customer ContentsAppendix Connecting a PCEnjoying 3D image viewing Introduction Precautions For Daily UseImportant safety precautions Introduction Precautions when transporting the TV3D Glasses Optional accessories Supplied accessoriesPart name Part number 3D glasses AN-3DG30Protection against overturning PreparationAnchoring the TV to the wall or a pillar Fixing the TV to the tablePreparation Stand Unit AssemblyAttaching the Stand Building the Work TableConnecting the TV Inserting the batteries Using the remote control unitAngle of the remote control unit TV front view Part names and functionsTV rear view Input buttonDigital Audio Part names and functionsRemote control unit Quick guide Recording CAM PIN settingInserting the CA card into the CI module CI plus 1.3 StandardQuick guide What is the HOME?Basic operation Regarding the instruction on the manualUse the software keyboard when you need to input text Using software keyboardUsing software keyboard Web browser Checking signal strength and channel strength DTV only Initial auto installationEChecking signal strength Supplying power to the antenna DTV onlyTurning on/off the power using the remote control unit Turning on/off the power using the control panel of the TVWatching TV Daily operationCH list EUsing Info on the menu screenProgramme info Selecting an external video sourceSwitching the analogue audio format Watching TV Switching the digital audio format DTV onlyTV mode of A2 TV broadcasts Nicam TV broadcastsOperator profile Watching TVFavourite Channel Information Teletext What is teletext?Text language Turning teletext on/offDisable EnableInitial teletext page DTV only MHEG-5 EPG DTV onlyGenre icon setup Useful settings for using EPGDisplay range setup EPG DTV onlyBasic operation EDisplay the EPG screen Watching TV Selecting a programme using EPG DTV onlyEClose the EPG screen Selecting a programmeSearch a programme in a category Display the timer list for TV programmesSearch for a programme by date/time Press a/bto select the desired programme, and then press ?Cancelling the timer setup Watching TV Timer setup using EPGECancelling using B button on the remote control unit Important informationEBefore connecting Connecting external devicesHdmi connection Connecting external devicesVideo connections Connecting external devices PB PR Component connection Digital audio output setting EAfter connectingAudio connections Speaker/amplifier connectionEWhat you can do with Aquos Link Controlling Hdmi devices using Aquos LinkEWhat is Aquos LINK? Regarding Select recording device Aquos Link connectionSelect the device for recording from connected devices Press Return to end the operationUse the following procedure to start recording Use the following procedure to start playbackOperating an Aquos Link device Aquos Link menuHdmi 4 terminal Rear side Using a Smartphone with the TVConnection for using Audio return channel EAuto input selection EAuto power onEOperation Using the Remote Control Picture settings Basic adjustmentAV mode Clear Picture ProcessingAdvanced Basic adjustmentPicture adjustments Audio adjustment Audio settingsAdaptive Volume Harmonics enhancer extended SurroundClear voice This function produces a surround effect from the speakersPower save settings Auto installation Channel settingsProgramme setup Digital setting DTV onlyButtons for Manual adjust operation Analogue settingUseful viewing functions TV Start-up time settingSort Erase programmePassword Individual setting PasswordUseful viewing functions Parental rating DTV onlyIndividual setting Language Individual setting TimeWide mode Optional features settingsSelecting the picture size manually Selecting the picture size automaticallyMode DTV only Audio select Headphone/Audio out select Input labelSelecting the Hdmi picture size automatically Hdmi auto viewAdditional features Boot picture Wallpaper settingTimer setting Game play timeKey lock Bluetooth setupMiracast setup Connecting to the network Device name settingNetwork function Playing Back Files from a Portable Device or PCNetwork function Wireless installationPage Ver. name Bluetooth Profile name Specifications Wireless LANSpecifications Bluetooth Screen for AQUOS.NET is displayed Using AQUOS.NETTwin Picture Press a/b/c/dto select a function, and then press ?About links Clear browser settingDisclaimers Connecting a USB HDD Other useful featuresDisconnecting the USB HDD USB-recordingHow to operate USB-recording Other useful featuresEButtons for USB-recording operation ButtonsUSB-recording timer setting Other useful features USB-recordingTimer list USB-recording playbackJump time setting Other useful features Time shift playbackAuto input selection Device registrationMultimedia/Home network Device format3D mode Other useful features Photo modeButtons for thumbnail operations When using Multimedia mode Selecting the picture size for Photo modeButtons for music mode When using Multimedia mode Music modeSlide show ESelecting the BGM Buttons for slide show BGM select operationButtons for playing mode When using Multimedia mode Other useful features Video modeSelecting the picture size for video mode EControl panelUSB device/SD memory card compatibility DivXR setupHome network server compatibility EDivXR VOD registration EDivXR VOD deregistrationConnecting a PC Connecting a PCDisplaying a PC image on the screen Selecting the picture sizeAdjusting the PC image manually Connecting a PC Adjusting the PC image automaticallyPC compatibility chart Auto syncPC control of the TV Connecting a PCIP Control setup Connecting a PC Command list Enjoying 3D image viewing Before using the 3D glassesPart Names Enjoying 3D image viewingPreparing for the 3D glasses Before using the 3D Glasses Using the 3D glassesUsing the 3D glasses Attaching the Nose PadAlign the battery holder with the battery slot on Replacing the BatteryReplace the battery 3D glasses and slide it back into placeDisplay format for 3D and 2D images Viewing 3D images Switching 3D to 2D modeAV mode 3D picture adjustments Switching to the previous mode3D Menu EBasic operationEnjoying 3D image viewing 3D setup Specifications 3D glasses Problem Possible solution Troubleshooting 3D ImagesAppendix TroubleshootingTroubleshooting Digital broadcasting Download setup ResetAppendix Updating your TV via DVB-T DTV onlyGetting information Updating your TV via USB/Network Picture / Audio test Software updateMessage list DTV only Receiver report DTV onlyESoftware composition Information on the software licence for this productSoftware licence Trademarks PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL SpecificationsRemoving the stand Mounting the TV on a wall Wall Mount Kit Specifications EWall mount audio setupStandard dimensions for wall mount kits are shown below Dimensional drawings Clearing the Password Page Page 1300 135