Enjoying 3D image viewing
Using the 3D glasses
Before using the 3D Glasses
Before using the 3D glasses for the first time, remove the insulating sheet attached to them.
Pairing the 3D glasses
To view 3D images, it is necessary to pair the 3D glasses and TV.
•To confirm pairing of the 3D glasses and TV, make sure that 3D images are displayed on the TV screen.
•When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts. When pairing is completed successfully, the LED lights up in green for 3 seconds.
•To switch between 2D and 3D modes, briefly press the power button.
Attaching the Nose Pad
50
Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a large and small nose pad.
Removing the nose pad | Attaching the nose pad |
NOTE
•When paired, make sure that the 3D glasses are kept at a distance of 50
Switching to 3D and 2D Mode
When viewing 3D images, you can press the power button to switch between 2D and 3D modes. This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D.
EViewing 2D images
When you press and hold for less than 2 seconds while viewing 3D images, the LED light blinks in red and the 3D images switch to 2D images.
Using the 3D glasses
EViewing 3D images
When you press and hold for less than 2 seconds while viewing 2D images, the LED light blinks in green and the 2D images switch to 3D images.
Usage Range of the 3D Glasses
The 3D glasses can be used by receiving a signal sent from the TV.
The 3D glasses turn off automatically after 15 seconds if no signal is received from the TV.
EOperating range
From directly the TV: approx. 5 m (within approx. 30° horizontally and 20° vertically)
76