Sharp LED TV operation manual Mode DTV only Audio select

Useful viewing functions

Option	Option
4:3 mode (DTV only)	Audio select

The 4:3 mode allows you to select between “Full” and “Normal”.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”.

			Item
Full		Wide image without side bars.
Normal		Normal range keeping 4:3 or 16:9 aspect
		ratio.
		4:3 screen types
	4:3 mode “Full”		4:3 mode “Normal”

Setting audio input

Option

Digital audio output

This function allows you to select the digital audio signal type.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital audio output”.

	Item
PCM	To stereo audio system
Bitstream	To multi-channel Dolby Digital, DTS
	audio system

When using the PC terminal or HDMI2 terminal, you must select which terminal uses the AUDIO IN jack for analogue audio input.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”.

When selecting “HDMI2” from the “INPUT” menu

	Item
HDMI	When connecting devices (including a
	PC) with a HDMI cable to the HDMI2
	terminal.
HDMI +	When connecting devices (including a
	PC) with a DVI/HDMI cable to the HDMI2
Analogue	terminal and inputting analogue audio
	signals from the AUDIO IN jack.

When selecting “PC” from the “INPUT” menu

	Item
Video	When connecting devices with AV cable
	to the PC terminal, display images
	without audio.
Video + Audio	When connecting a PC to the PC
	terminal, and inputting analogue audio
	signals from the AUDIO IN jack.

Skipping specified inputs

Option

Input skip

This setting allows you to skip the inputs on the input source selection operation.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”.

NOTE

•If you connect external equipment to an HDMI terminal which you have set to be skipped, a notification message appears on the display when a signal is received from the connected external equipment. Press “?” to reset the related skipping setting so that the input terminal becomes available.

Option

Input select

For setting the signal type of external equipment.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.

Input source	Selectable item
Input 6	AUTO, COMPONENT, VIDEO

48