Sharp LED TV operation manual Connecting external devices, Video connections, Hdmi connection

Connecting external devices

Video connections			DVI/HDMI conversion
			Using a DVI/HDMI cable, the digital video signals of
HDMI connection			a DVD can also be played via the compatible HDMI
			connection. The sound must be fed in additionally.
			•	When connecting a DVI/HDMI cable to the HDMI terminal, the
Example of connectable devices				image may not come in clearly.
			• Both HDMI and DVI use the same HDCP copy protection
E DVD player/recorder
				method.
E Blu-ray player/recorder
E Game console				EWhen using the HDMI 2 terminal
The HDMI connections permit digital video and audio				You must set the audio signal input source depending on
				the type of HDMI cable connected (refer to page 48 for
transmission via a connection cable from a player/
				details).
recorder. The digital picture and sound data are
				HDMI-certified cable
transmitted without data compression and therefore lose
				1 Press bto select “HDMI2” from the
none of their quality. Analogue/digital conversion is no
longer necessary in the connected devices, which also				“INPUT” menu, and then press ?.
would result in quality losses.				2 Go to “HOME” > “TV Menu” > “Setup” >
				“Option” > “Terminal setting” > “Audio select”
				> select “HDMI”.
				DVI/HDMI cable
				1 Press bto select “HDMI2” from the
				“INPUT” menu, and then press ?.
				2 Go to “HOME” > “TV Menu” > “Setup” >
				“Option” > “Terminal setting” > “Audio select”
				> select “HDMI + Analogue”.
			NOTE
	ARC		•	If a connected HDMI device is AQUOS LINK
				compatible, you can take advantage of versatile
				functions (Pages 32–35).
			•	Video noise may occur depending on the type of HDMI cable
				used. Make sure to use a certified HDMI cable.
			•	When playing the HDMI image, the best possible format for
	(DC 5V 900mA)			the picture will be detected and set automatically.
n			•	An ARC (Audio Return Channel) compatible audio receiver
				must be connected to the HDMI 3 terminal with an ARC-
				compatible cable.
			•	All HDMI terminals support 3D image signals.
o		p	•	HDCP 2.2 copy protected signal can be viewed via HDMI 1
				terminal only.

Supported video signal

576i, 576p, 480i, 480p, 1080i, 720p, 1080p, 2160p. See page 71 for PC signal compatibility.

 3.5 mm stereo minijack cable (commercially available)

DVI/HDMI cable (commercially available)

HDMI-certified cable (commercially available)

NOTE

•When connecting 4K (3,840 x 2,160 (Ultra HD) 30Hz, 25Hz, 24Hz) equipment to the TV, use the HDMI 1,2,3,4 terminal and use HDMI cable of High speed type.

Supported audio signal

Linear PCM, sampling rate 32/44.1/48kHz. Dolby Digital, DTS.

29