Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance, going to bed while watching TV.
1 Press SLEEP.
• Remaining time displays when sleep timer has been set.
Sleep Timer: Remain 2 hr. 00 min.
3 | Press a/b to select “Energy save”, and then | |
| press ENTER. | |
4 | Press a/b to select “Standard” or | |
| “Advanced”, and then press ENTER. | |
|
| |
Selected item | Description | |
|
| |
Standard | Reduces the backlight brightness by 25%. | |
|
| |
Advanced | Reduces the backlight brightness by 50%. | |
|
|
|
Off |
| The backlight brightness is the same value |
|
| of your settings in the selected “AV MODE”. |
|
|
|
2 | Each time you press SLEEP, the remaining | ||||
| time switches as shown below. |
| |||
| 0 hr. 30 min. |
| 1 hr. 00 min. |
| 1 hr. 30 min. |
|
|
| |||
Off 
2 hr. 30 min. 
2 hr. 00 min.
NOTE
•When the time has been set, countdown automatically starts.
•Five minutes before the preset of time expires, the remaining time displays each minute.
•Select “Off” by pressing SLEEP to cancel the sleep timer.
ECO picture control
This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged.
1 | Press MENU and the MENU screen displays. |
2 | Press c/d to select “ECO”. |
| • ECO menu displays. |
3 | Press a/b to select “ECO picture control”, |
| and then press ENTER. |
4 | Press c/d to select “On” or “Off”, and then |
| press ENTER. |
NOTE
•This function does not work when “AV MODE” is set to “DYNAMIC (Fixed)” or “AUTO”.
•This function does not work when “Energy save” is set to “Standard” or “Advanced”.
Energy save
This function enables you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span.
1 | Press MENU and the MENU screen displays. |
2 | Press c/d to select “ECO”. |
| • ECO menu displays. |
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day.
1 | Press MENU and the MENU screen displays. |
2 | Press c/d to select “ECO”. |
| • ECO menu displays. |
3 | Press a/b to select “No signal off”, and then |
| press ENTER. |
4 | Press c/d to select “Enable”, and then press |
| ENTER. |
• Five minutes before the power shuts down, the remaining time displays every minute.
NOTE
•“Disable” is the factory preset value.
•When a TV programme finishes, this function may not operate.
Auto power-off when there are no operations performed
You can set the TV to automatically power off when no TV operation is performed for more than 3 hours.
1 | Press MENU and the MENU screen displays. |
2 | Press c/d to select “ECO”. |
| • ECO menu displays. |
3 | Press a/b to select “No operation off”, and |
| then press ENTER. |
4 | Press a/b to select “30min.” or “3hr.”, and |
| then press ENTER. |
• Five minutes before the power shuts down, the remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
30
7/8/09 11:33:07 AM