Sharp LC-40LE700X Operating an Aquos Link device, Auto power on, Selecting recorder

Repeat steps 1 to 3 in AQUOS LINK control.

AQUOS LINK

Auto power on Selecting channel key

If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

1	Repeat steps 1 to 3 in AQUOS LINK control.
2	Press a/b to select “Auto power on”, and
	then press ENTER.
	AQUOS LINK control	Setting auto power on by AQUOS LINK
	Auto power on
	Selecting recorder
	Selecting channel key
	Using genre info.	On	Off

3	Press c/d to select “On”, and then press
	ENTER.
4	Press MENU to exit.

NOTE

• The factory default for this item is “Off”.

This function allows you to select the channel of the connected HDMI device using the TV’s remote control unit.

1

2 Press a/b to select “Selecting channel key”, and then press ENTER.

AQUOS LINK control	Setting channel select key for AQUOS LINK
Auto power on	compatible device via the HDMI input
Selecting recorder
Selecting channel key	INPUT1	On	Off
Using genre info.	INPUT2	On	Off
	INPUT3	On	Off

Press a/b to select the input source of the

3 connected HDMI device you want to control using the TV’s remote control unit, and then press ENTER.

4	Press c/d to select “On”, and then press
	ENTER.

Selecting recorder

Here, you can select a recorder for the recording from several connected recorders.

1	Repeat steps 1 to 3 in AQUOS LINK control.
2	Press a/b to select “Selecting recorder”, and
	then press ENTER.
	AQUOS LINK control	Selecting recorder for recording
	Auto power on		by [REC] button
	Selecting recorder	Input	Location
	Selecting channel key	INPUT1	[1. 0. 0. 0]
	Using genre info.
		INPUT2	[2. 0. 0. 0]

3	Select the recorder, and then press ENTER.
4	Press MENU to exit.

NOTE

•If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS Recorder, the external source’s indication changes (e.g. from “INPUT 1” to “INPUT 1 (Sub)”).

Using genre info.

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included in the digital broadcast.

1	Repeat steps 1 to 3 in AQUOS LINK control.
2	Press a/b to select “Using genre info.”, and
	then press ENTER.
3	Press c/d to select “On”, and then press
	ENTER.

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI- connected device with a single remote control unit.

1	Open the remote control unit’s fl ip cover.
2	Press PLAY I to start playback of a title.

•See page 53, section “Playback of titles using AQUOS LINK” if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder.

3	Press FWD J to fast forward.
	Press REV G to reverse.
	Press STOP H to stop.

52

AQUOS LINK control

Auto power on

Selecting recorder

Selecting channel key

Using genre info.

Selecting recorder for recording

by [REC] button

Input	Location
INPUT1	[1. 0. 0. 0]
INPUT1 (Sub)	[1. 1. 0. 0]
INPUT2	[2. 0. 0. 0]

Press POWER to turn the HDMI-connected

device on/off.

LC-40LE700X.indb 52

6/26/09 4:26:12 PM