Sharp LC-40LE700X Teletext language setting, Displaying Subpages, Time display, Teletext function

Teletext function

Teletext language setting

If Teletext information does not display correctly, perform the procedure below.

Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic.

Each table is compatible with the Teletext languages listed below.

1		Press MENU and the MENU screen displays.
2		Press c/d to select “Setup”.
3		Press a/b to select “Text language”, and
		then press ENTER.
4		Press a/b to select receivable teletext
		broadcasting language in your country.
		MENU [Setup ... Text language]
			Teletext language settings
				West Europe
				East Europe
				Greek/Turkish
				Cyrillic
	•		West Europe – English, French, Scandinavian,
			Czech, German, Spanish, Italian
	•		East Europe – Polish, French, Scandinavian,
			Czech, German, Slovenian/Croatian, Italian,
			Rumanian
	•		Greek/Turkish – English, French, Scandinavian,
			Turkish, German, Spanish, Italian, Greek
	•		Cyrillic – English, Russian, Estonian, Czech,
			German, Spanish, Ukrainian, Lettish

NOTE

•Teletext can display only when it is sent by a network. Not used to convert between languages.

Displaying Subpages

You can display subpages as they are transmitted.

1	Press m to display Teletext.
2	Press 1 to display the subpage as shown
	below.
	Subpage screen

–+

3	Select the desired subpage by using CHr/
	CHs, Red or Green.

• 0 – 9 directly selects the desired subpage.

4 Press 1 to exit the subpage screen.

Time display

You can display the time information included in the Teletext broadcast.

1	Select a TV channel providing Teletext
	information.
	(The time information is automatically
	captured.)
2	Press DISPLAY. The channel display will
	appear on the display.

Press DISPLAY again. The channel display

3 about three seconds on the screen. Time information will continuously display on the lower right of the screen.

4	Even when you change the TV channel, you
	can display the time information with steps 2
	to 3 above.
NOTE

•The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 to 4 again.

•If acquired successfully the time information will appear in the upper-right corner of the screen by pressing MENU.

61

LC-40LE700X.indb 61

6/26/09 4:26:21 PM