Sharp LC-40LE700X Labelling input sources Skipping HDMI/RGB input, Colour system settings

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Settings when using external devices

Labelling input sources Skipping HDMI/RGB input

You can assign each input source a label as you prefer.

1	Press TV/VIDEO to select the desired input
	source.
2	Press MENU and the MENU screen displays.
3	Press c/d to select “Setup”.
4	Press a/b to select “Input label”, and then
	press ENTER.
5	Press a/b/c/d to select each character of
	the new name for the input source, and press
	ENTER.
		External equipment name settings
			A	B C D E F G H I J CLEAR
			K L M N O P Q R S T			BACK
			U V W X Y Z + - . _
		0 1 2 3 4 5 6 7 8 9				END
					(Example)
6	Repeat until the name is fully spelt out.
	•	The name can be 6 characters or less.
	•	When you want to set an input source name of
		less than 6 characters, select “END”, then press
		ENTER to exit from the labelling menu.
					INPUT SOURCE
					TV
					DVD

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

INPUT7

(Example)

NOTE

•You cannot change labels if the input source is TV.

48

This setting allows you to skip the HDMI or RGB input on the input source selection operation.

1

2

3	Press a/b to select “Input skip”, and then
	press ENTER.
4	Press a/b to select the Input (INPUT1 to
	INPUT3 and INPUT7 ) you wish to skip, and
	then press ENTER.

INPUT1 (HDMI)	Skip input selection of HDMI
INPUT2 (HDMI)
INPUT3 (HDMI)
INPUT7 (RGB)	Yes	No

5	Press c/d to select “Yes”, and then press
	ENTER.
6	Press MENU to exit.

Colour system settings

You can change the colour system to one that is compatible with the image on the screen.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Option”.
3	Press a/b to select “Colour system”, and
	then press ENTER.
4	Press a/b to select a compatible video signal
	system of your equipment, and then press
	ENTER.

Colour system settings

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

NOTE

•Factory preset value is “AUTO”.

•If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

•“Colour system” is selectable only when inputting an S-VIDEO or composite signal.

LC-40LE700X.indb 48

6/26/09 4:26:09 PM