Sharp LC-40LE700X operation manual Picture size settings, Watching TV Quick start

Watching TV

Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “Quick start”, and then
	press ENTER.
4	Press c/d to select “On” or “Off”, and then
	press ENTER.

Picture size settings

Selecting the Wide Screen Signalling (WSS) picture size automatically

WSS allows a television to switch automatically among the different screen formats.

Selected item	Description
On	The TV quickly starts up from standby,
	19 W or more of power consumption is
	required during standby.
Off	Power consumption is less than 1 W.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “WSS”, and then press
	ENTER.
4	Press c/d to select “On” or “Off”, and then
	press ENTER.
NOTE

•Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled.

Selecting the Wide Screen Signalling (WSS) picture size manually

The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

3	Press a/b to select “4:3 mode”, and then
	press ENTER.
4	Press c/d to select “Panorama” or “Normal”,
	and then press ENTER.
	WSS signal 4:3 screen
4:3 mode “Panorama”		4:3 mode “Normal”

Selected item	Description
Panorama	Wide image without side bars
Normal	Normal range keeping 4:3 or 16:9 aspect
	ratio

31

LC-40LE700X_en_d.indd 31

7/8/09 9:58:31 AM