Sharp LC-40LE700X operation manual Connecting a PC Adjusting the PC image automatically

Connecting a PC

Adjusting the PC image automatically Adjusting the PC image manually

This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/D-sub conversion cable, etc.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “Auto sync.”, and then
	press ENTER.
4	Press c/d to select “Yes”, and then press
	ENTER.
	• Auto sync. starts and “Adjusting the image”
	displays.
	MENU [Setup ... Auto sync.]
		Auto adjustment of image display parameters
		Yes	No

Auto sync.

30%

Adjusting the image.

5 Press MENU to exit.

NOTE

•When Auto sync. is successful, “Auto sync completed successfully” displays. If not, Auto sync. failed.

•Auto sync. may fail even if “Auto sync completed successfully” displays.

•Auto sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto sync.

•Be sure to connect the PC to the TV and switch it on before starting Auto sync.

•Auto sync. can be executed only when inputting analogue signals.

Ordinarily you can easily adjust the picture as necessary to change image position using Auto sync. In some cases, however, manual adjustment is needed to optimise the image.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “Fine sync.”, and then
	press ENTER.

Press a/b to select the specifi c adjustment

4 item.

			Image position adjustment, etc.
H-pos.	[ 90]	–	+	H-pos. adjustment
V-pos.	[ 39]	–	+	V-pos. adjustment

Clock	[ 90]	–	+	Clock freq. adjustment
				Clock phase adjustment
Phase	[ 20]	–	+
				Return to factory pre-settings
	Reset

Selected item		Description
H-pos.		Centres the image by moving it to the left
		or right.
V-pos.		Centres the image by moving it up or
		down.
Clock		Adjusts when the image fl ickers with
		vertical stripes.
Phase		Adjusts when characters have low
		contrast or when the image fl ickers.
5	Press c/d to adjust the item to your desired
	position.
6	Press MENU to exit.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

•“Clock” and “Phase” in the “Fine sync.” menu can be adjusted only when inputting analogue signals.

LC-40LE700X.indb 57

57

6/26/09 4:26:18 PM