Features and Specifications, Power Output

POWER 5500 5-Channel Amplifier

Features and Specifications

Your new Jensen Power mobile stereo power amplifier is the amplifier of choice for the high demands of auto sound reproduction. With its deep-bass reproduction and plenty of reserve power, low harmonic distortion and neutral reproduction, the Power series of amplifiers takes Mobile Hi-Fi to new heights. Like all Jensen products, when it comes to accurate sound reproduction the Power series takes a back seat to no one. Jensen will bring your Hi-Fi experience to new heights with the following features:

•MOSFET Power Supply

•High Current Bi-Polar Output Transistors

•Optimized Class B Design Minimizes Distortion and Reduces Idle Current.

•Easily Drives 2-Ohm Loads

•Fullrange Highpass Filter: Continuously Variable 16Hz ~160Hz

•Subwoofer Infra-Sonic Filter: Continuously Variable 16Hz ~60Hz

•Subwoofer Low Pass Filter: Continuously Variable 30Hz~160Hz

•Subwoofer Bass EQ Filter: Continuously Variable 0~12dB @ 45Hz

•Short Circuit, DC-Offset and Thermal Overload Protection Circuitry

•Diagnostic LED's: Green - Power, Red - Standby / Fault

•Remote Input Level Control (For subwoofer channel) w/ 5 Meter Cable

Specifications

•Load Impedance - 2/4 Ohm

•Frequency Response - 10~60kHz (Subwoofer - 16~160Hz), -3dB

•THD+N @ 1kHz, 5 Watts - 0.02%, 4-Ohm, 14.4VDC

•Stereo Separation @ 1kHz - >60dB

•Signal to Noise Ratio - >100dB (Rated Power)

•Input Sensitivity - 400mV~5V

•Input Impedance - 20kOhm nominal

•Fuse - 1 x 70 Amp MAXI Fuse

•Size - L22" x H2.5" x W9"

•Weight - 10.8lbs

Power Output

RMS Power Output @ 2% THD+N, 1kHz, 14.4VDC

4 Channels

4x 70 Watts 4-Ohm

4x 90 Watts 2-Ohm

Bridged Stereo

2 x 180 Watts 4-Ohm

Mono - Subwoofer

1x 200 Watts 4-Ohm

1x 300 Watts 2-Ohm

Specifications subject to change without notice.