GPV700.2 / GPV1000.2 2-CHANNEL AMPLIFIER APPLICATIONS
Stereo high pass with mono
In this application we will use a 2 channel amplifier for the high frequencies, and a second one for the low frequencies, or mono sub bass. Please consult the speaker specifications to determine maximum amplifier power requirements.
Interconnect cable checklist:
Connect the inputs of the HIGHS amplifier to a Radio/CD with good quality RCA cables. Connect the LINE OUT of the HIGHS amplifier to the inputs of the BASS amplifier with a stereo RCA to RCA cable.
Mono bass woofer wiring:
Connect the mono speaker positive terminal to the RIGHT +, and its negative terminal to LEFT
Switch setting checklist:
-Highs amplifier:
-Lows amplifier:
Crossover frequency control checklist:
Highs amplifier:
-HI PASS: 100 Hz
-LOW PASS: N/A
Lows amplifier:
-HI PASS (Subsonic filter): 10 Hz to 40 Hz
-LOW PASS: 80 Hz
Please note that these frequency points are suggestions only. Refer to the loudspeaker manufacturer specifications and the section “Setting up systems after installation for best performance”
Level control checklist:
-Refer to the section “Setting up systems after installation for best performance”
Minimum final loudspeaker impedances:
-
-
FULL RANGE
STEREO LINE INPUT
L | LINE |
| OUT |
R | LINE INPUT |
I INPUT | gnd - + |
5V 0.2V | LEVEL |
0dB 12dB | BASS EQ |
60Hz 1.2KHz | HPF |
30Hz 250Hz | LPF |
FULL LPF HPF | |
MONO STEREO | MODE |
30th ANNIVERSARY
GROUND POUNDER
| + |
| FULL RANGE | |
SPEAKER OUTPUT | LEFT + - LEFT | BRIDGED | ||
SPEAKERS | ||||
| ||||
| - |
|
| |
FUSE |
|
|
| |
| GND REM +12V |
| TO BATTERY + 12 volts VIA FUSE | |
POWER INPUT |
| REMOTE | ||
| CHASSIS GROUND | |||
|
|
|
STEREO
INTERCONNECT
RCA CABLE
R | L | LINE |
|
| OU |
R | L | LINE INPUT |
HI | + - |
|
INPUT | gnd - + |
|
5V 0.2V |
| LEVEL |
0dB 12dB |
| BASS EQ |
60Hz 1.2KHz |
| HPF |
30Hz 250Hz |
| LPF |
FULL LPF HPF |
| |
MONO STEREO |
| MODE |
30th ANNIVERSARY
GROUND POUNDER
|
| MONO BASS | |
|
| SPEAKER | |
| + |
| |
SPEAKER OUTPUT | LEFT + - LEFT | BRIDGED | |
| - |
| |
FUSE |
|
| |
| GND REM +12V | TO BATTERY + 12 volts VIA FUSE | |
POWER INPUT | REMOTE | ||
CHASSIS GROUND | |||
|
|
4