To recall a setting, via the front panel buttons, do the following:
1.When the LED displays are dimmed, press the UP button.
The abbreviation “rCL” (recall) appears in the LEFT LED display.
2.Press the appropriate CHANNEL SELECTOR button.
The abbreviation “rCL” (recall) appears in the LEFT LED display and the number of that CHANNEL SELECTOR button appears in the RIGHT LED display.
3.Press the same CHANNEL SELECTOR button again.
The memory recalls the setup. As confirmation, for a few seconds, “YES” appears in the LEFT LED display and the setup number appears in the RIGHT LED display.
If no setting is stored in the
Note:
Recalling a setup implements the amplifier gain or the attenuation immediately
10 |
|