Kramer Electronics VA-8xl user manual Open Configuration File window appears

Page 23

Figure 14: Atmel – Flip Window

3.Press the keyboard shortcut key F4 (or select the “Read Configuration File” command from the File menu, or press the keys: Alt FR).

The “Open Configuration File” window appears:

Figure 15: Open Configuration File Select Window

4.Choose the file: “Va8xl.cfg” (by double-clicking it).

If COM 2 was not selected (see Section 7.2), an RS-232 error message appears. In the “Atmel – Flip” window, the Operations Flow column is disabled, and crosses appear in the third column.

20	VA-8xl - Upgrading the Flash Memory

Image 23

Contents VA-8xl Page Figures Introduction Achieving the Best Performance Getting StartedThis section defines the VA-8xl OverviewPower Switch VA-8xl 8-Channel Balanced Stereo Audio Amplifier Rear Panel If required, connect a PC via RS-232, see Connecting the VA-8xlVA-8xl Connecting the VA-8xl Operating the VA-8xl Adjusting the Gain/Attenuation of the ChannelsTo store a setting, via the front panel buttons Storing and Recalling SetupsVA-8xl Operating the VA-8xl Preparing the RS-232 Port on a Single Unit Controlling the VA-8xlControlling a Single VA-8xl Unit To PC Illustrates how to configure up to 15 VA-8xlunits Connecting a Control Interface on a Set of Units Preparing the RS-232 Connectors Connecting the RS-485 Control Interface An RS-485 Control Interface Setup Downloading from the Internet Connecting the PC to the RS-232 PortUpgrading the Flash Memory Splash Screen Upgrading FirmwareOpen Configuration File window appears Atmel Flip Window RS-232 Communication If an error message Not Finished shows, click Run again Atmel Flip Window Operation Completed Technical Specifications RS-232 Protocol Default Communication Parameters1st Byte Kramer ProtocolHex Codes for Attenuation Gain Control Channel Number Codes Hex Codes for Amplification Gain ControlVA-8xl Kramer Protocol 2900