Vent Mount Method (B)
To mount the vehicle dock using the vent mount method, install the vent mount as follows:
1.If the vent louvers in your vehicle are recessed, you may need to use the longer vent hooks with the vent mount. Refer to Figure 4 and install the longer vent hooks into the vent mount. Be sure to observe the orientation of the vent hooks as shown.
2.Attach the vent mount to the vehicle dock using the provided screws. (See Figure 5.)
Remove | Slide Short | Slide Extended | Replace |
End Cap | Vent Hooks Out | Vent Hooks In | End Cap |
Figure 4
Attach Dock to Mount with Included Screws
Figure 5