Direct Tuning
Channels can be directly accessed by pressing and releasing the Knob and then using the 0 – 9 keys to enter the desired channel number (see Figure 36). Once the desired number has been entered, the channel will change and the display will revert to the Default screen for the selected channel. The SP5 will tune the channel immediately if three numbers are entered (for example, “0”, ”0”, “7”), but if just one or two digits are entered, the radio will tune to the new channel after three seconds.
Figure 36
Channel Presets
Channel presets lets you store up to 30 of your favorite channels as presets for quick access with the press of a button.
Setting Channel Presets
Presets are stored in three banks, A, B, and C, each containing 10 channel presets.
1.Press the Band button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default display screen (see Figure 30, on page 52).
2.Select the channel you want to preset.
3.Press and hold for two seconds the numbered preset button (0 – 9) in which you want to store the channel.
58 [ Operation ]