Channel Preview
Activating Channel Preview lets you browse what’s on other channels when the Default Screen is active. Normally, when the Default Screen is active, rotating the Knob or pressing a Channel UP or DOWN button on the remote automatically tunes the Sportster SP5 to the next higher or lower channel. When Channel Preview is active, rotating the Knob or using the Channel UP/DOWN buttons will change the display to show what’s on the next higher or lower channel while the SP5 remains tuned to the channel you’re listening to.
•If you want to listen to the new channel, press the Select button. If you don’t press the Select button, after 5 seconds the SP5’s display reverts back to the Default Display.
To activate Channel Preview:
1.In the Settings screen (see page 77), highlight the Channel Preview option (see Figure 69).
Figure 69
2. Use the Select button to cycle between ON and OFF. (Default is OFF.)