Pickup Truck Antenna Cable Routing Procedure
Figure 12 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a pickup truck.
ANTENNA
1. Route Cable Under
Rubber Molding
Around Windshield
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
5. Bring Cable Out to SIRIUS Receiver Location
4.Bring Cable out from Weatherstripping and Route Under Carpet
3.Route Cable Out of Molding and Into Weatherstripping Around Door Opening. Continue to Bottom of Door Opening.
Figure 12
Follow these detailed cable installation instructions:
1.Use a plastic putty knife or similar tool to lift the rubber molding around the wind- shield and tuck the antenna cable underneath it.
2.Continue tucking the cable underneath the windshield molding around the wind- shield to the lowest corner.