Sedan/Coupe Antenna Cable Routing Procedure
Figure 11 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a sedan/coupe.
1. Feed Cable Under | 6. Bring Cable Out To |
Rubber Molding | |
Around Window | SIRIUS Receiver |
2. Route Cable Out of | Location |
| |
Window Molding and | ANTENNA |
Into Weatherstripping | |
Around Trunk Opening |
|
3.Route Cable Along Trunk Wall and Into Cabin
5. Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.
4.Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle
Figure 11
Follow these detailed cable installation instructions:
1.Feed the cable from the antenna underneath the rubber molding around the rear window. Use a plastic putty knife or similar object to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the an- tenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, SIRIUS recommends consulting with a professional installer.