4.The selected preset number will flash and then remain lit on the display to show that it has been memorized.
If the preset button you selected already has a channel stored in it, the preset will be replaced with the newly stored channel.
Recalling Channel Presets
The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0 through
9buttons.
1.Press the Band button to activate the preset bank you want. The selected bank is shown in the lower right corner of the default display screen.
2.Press the desired preset button 0 – 9 to select the preset. The channel will change and the display will revert to the Default screen for the new channel, with the pre- set shown in the lower right corner.
Pressing and holding the Band button displays the My Presets screen (see below).
My Presets Screen
You can use the Knob to quickly see what’s playing on all of your presets:
1. Press and hold the Band button to activate the My Presets screen (see Figure 37).
Figure 37
2.Turn the Knob in either direction to move through the presets. When the preset you want to
[ Operation ] 59