3.Bring the cable out from the trim near the firewall and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.
4.Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.
Convertible Antenna Cable Routing Procedure
Figure 14 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a convertible.
6. Bring Cable Out To
SIRIUS Receiver
Location
1.Bring Cable from Antenna Into Inside of Trunk Lid
5.Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.
ANTENNA
2.Tape Cable Along Inside of Lid to
Hinge Strut | 3. Tie Cable to Hinge Strut, Allowing |
| |
| Slack for Lid to Open and Close. |
| Route Cable Into Cabin |
| Through Existing Wire |
| Channel. |
| Figure 14 |
4.Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle