INSTALLATION & CONFIGURATION | Attendant Monitor Operations Manual |
Tenant Number Database (cont)
Initialize
Component
Configuring the Tenant Number Database
This database must be configured before the Attendant Monitor application can operate. The database values are set using the APM Applications Manager Main
1.Build a Master Database File
Enter data into the master database fields to add the necessary phone line numbers.
2.Process the Application Database
Use the Process Application Databases option on the APM Database Administration menu to create the application database file.
(When the Process option is activated, data is drawn from the master database and converted to the formats specified in the application definition file.)
3.Install the Application Database
Use the Install Application Databases option on the APM Database Administration menu to enable Attendant Monitor to copy its database.
Note: Refer to the APM Operations Manual for more detailed instructions on adding a database.
The Attendant Monitor component must be initialized from the APM. Follow the steps below to initialize the AttendantMonitor component:
-On the APM System Operations Menu, select the
-Use the Initialize command to start up the “AttendantMonitor” component.
This completes the Atendant Monitor application installation and
configuration...
Page 14 |