NEC LCD1960NX manual Remove Monitor Stand for Mounting, Figure S.1

Page 8

Quick Start –continued

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Disconnect all cables.

2.Place hands on each side of the monitor and lift up to the highest position.

3.Place monitor face down on a non-abrasive surface. (Place the screen on a 55 mm/ 2.2 inch platform so that the stand is parallel with the surface.) (Figure S.1)

55 mm

Figure S.1

4.Remove the stand cover by sliding the top/bottom pieces off the stand (Figure S.2).

5.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure S.2). The monitor is now ready for mounting in an alternate manner.

6.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method. (100 mm pitch)

Stand cover top

Stand cover bottom

Figure S.2

Caution: Please use the attached screws (4 pcs) when mounting. To fulfil the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).

6

LCD1960NX050603.p65

6

5/21/03, 1:06 PM

Image 8
Contents MultiSync LCD1960NXTM Index Canadian Department of Communications Compliance Statement FCC InformationContents Turn off the power to your computer Quick StartFigure C.1 Vacation Switch Swivel Raise and Lower Monitor ScreenTilt Remove Monitor Stand for Mounting Figure S.1Controls MenuBrightness/Contrast Controls AccuColor Control SystemsTools InformationSafety Precautions and Maintenance Recommended UseErgonomics Specifications Monitor MultiSync LCD1960NX SpecificationsFeatures Troubleshooting No pictureNEC-Mitsubishi Monitor Customer Service & Support ReferencesLimited Warranty TCO’99 MultiSync LCD1960NX L192R9 Black ModelTCO’99 FAX Number +46 8 782 92 Mail Internet development@tco.seTCO’03 MultiSync LCD1960NX L192R9 White ModelTCO’03 Declaration of the Manufacturer Avertissement Informations FCCContenu La bote* de votre nouveau moniteur NEC MultiSync¨ contientMise en marche rapide Mettez lÕordinateur hors tensionMise en marche rapide suite Figure C.1 Interrupteur de VacancesLevez et baissez l’écran du moniteur InclinerPivoter Nota Manipule sur soin quand lÕŽcran inclinant ŽcranDépose du support du moniteur pour montage Commandes ExitCommandes suite OutilsInformation Usage recommandé Consignes de sécurité et d’entretienUsage recommandé suite ErgonomieFiche technique Fonctions Dépannage Pas dimageSŽlectionne ÒDownloads and DriversÓ RéférencesTechform.htm Garantie limitée MultiSync LCD1960NX L192R9 Pour Noir la Modéle Pourquoi des ordinateurs «éco-étiquetés»?Qu’est-ce qu’implique l’éco-étiquetage? Exigences environnementalesTCO’99 suite PlombCadmium MercureTCO’03 C’est une traduction de portion Anglaise de TCO’03 MultiSync LCD1960NX L192R9 Pour Blanche la ModéleTCO’03 suite Déclaration du fabricant Déclaration DE Conformité Declaration of Conformity