NEC LCD1960NX manual Menu, Brightness/Contrast Controls, AccuColor Control Systems

Page 9

Controls

OSM® (On-Screen Manager) control buttons on the front of the monitor function as follows:

To access OSM menu, press any of the control buttons ( <, >, –, +, EXIT). To change signal input, press the SELECT button.

NOTE: OSM must be closed in order to change signal input.

 

Menu

EXIT

Exits the OSM controls.

 

Exits to the OSM main menu.

< / >

Moves the highlighted area left/right to select control menus.

 

Moves the highlighted area up/down to select one of the controls.

–/+

Moves the bar left/right to increase or decrease the adjustment.

SELECT

Active Auto Adjust function. Enter the OSM controls. Enter the OSM sub menu.

RESET

Resets the highlighted control menu to the factory setting.

 

 

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the RESET function by pressing the EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO AUTO (Analog input only)

Adjusts the image displayed for non-standard video inputs.

Auto Adjust (Analog input only)

Automatically adjusts the Image Position and H. Size settings and Fine settings.

Image Controls (Analog input only)

LEFT / RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN / UP

Controls Vertical Image Position within the display area of the LCD.

H.SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

FINE

Improves focus, clarity and image stability by increasing or decreasing this setting.

AccuColor® Control Systems

Six color presets select the desired color setting (sRGB and NATIVE color presets are standard and cannot be changed). R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. NATIVE: Original color presented by the LCD panel that is unadjustable. sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate color without further color management overhead in the most common situations.

7

LCD1960NX050603.p65

7

5/21/03, 1:07 PM

Image 9
Contents MultiSync LCD1960NXTM Index FCC Information Canadian Department of Communications Compliance StatementContents Quick Start Turn off the power to your computerFigure C.1 Vacation Switch Raise and Lower Monitor Screen TiltSwivel Figure S.1 Remove Monitor Stand for MountingMenu ControlsBrightness/Contrast Controls AccuColor Control SystemsInformation ToolsRecommended Use Safety Precautions and MaintenanceErgonomics Monitor MultiSync LCD1960NX Specifications SpecificationsFeatures No picture TroubleshootingReferences NEC-Mitsubishi Monitor Customer Service & SupportLimited Warranty MultiSync LCD1960NX L192R9 Black Model TCO’99FAX Number +46 8 782 92 Mail Internet development@tco.se TCO’99MultiSync LCD1960NX L192R9 White Model TCO’03TCO’03 Declaration of the Manufacturer Informations FCC AvertissementLa bote* de votre nouveau moniteur NEC MultiSync¨ contient ContenuMettez lÕordinateur hors tension Mise en marche rapideFigure C.1 Interrupteur de Vacances Mise en marche rapide suiteIncliner Levez et baissez l’écran du moniteurPivoter Nota Manipule sur soin quand lÕŽcran inclinant ŽcranDépose du support du moniteur pour montage Exit CommandesOutils Commandes suiteInformation Consignes de sécurité et d’entretien Usage recommandéErgonomie Usage recommandé suiteFiche technique Fonctions Pas dimage DépannageRéférences Techform.htmSŽlectionne ÒDownloads and DriversÓ Garantie limitée Pourquoi des ordinateurs «éco-étiquetés»? MultiSync LCD1960NX L192R9 Pour Noir la ModéleQu’est-ce qu’implique l’éco-étiquetage? Exigences environnementalesPlomb TCO’99 suiteCadmium MercureMultiSync LCD1960NX L192R9 Pour Blanche la Modéle TCO’03 C’est une traduction de portion Anglaise de TCO’03TCO’03 suite Déclaration du fabricant Déclaration DE Conformité Declaration of Conformity