Radio unit, 1Adjusting the reception range

3 Detailed instructions

3.2 Radio unit

The TechniSat WERRA 1 is equipped with a high-quality radio reception unit for the reception bands FM, MW, SW and LW. The following chapter describes how to use these bands and the functions which are connected with them.

3.2.1Adjusting the reception range

With your TechniSat WERRA 1 you are able to switch between three memory ranges for FM programmes (F1, F2 and AST-FM). Furthermore, you can select between the reception ranges AST-AM, MW, SW and LW (AM bands). It is possible to store a maximum of six radio stations in each memory resp. reception range.

To select the reception range proceed as follows:

Switching between F1 and F2:

-By shortly pushing the BAND button you can switch between the FM memory ranges F1 and F2.

Short push - switching between F1 and F2

S t ep 1

Switching to AST memory:

- See 3.2.2 “AST function“

3 Detailed instructions

Switching between FM and AM band (MW, SW, LW):

-With a longer push (approx. 2 seconds) on the BAND button you can switch between the FM and the AM band.

Push for approx. 2 sec. - switching from FM to AM

S t ep 1

Selecting the MW, SW or LW band:

-Switch to the AM band as described under “Switching between FM and AM band“.

-By shortly pushing the BAND button you can switch between MW, LW and SW. In the display the selected band is now indicated.

Step 1: Push for approx. 2 sec.;
select the AM band;
switch between MW, LW and SW by shortly
pushing this button	S t ep 1